| | | Measuring range 0.05 up to 500 meters With our DLS-B device you can measure distances from 0.05 up to 500 meters. Accuracy of up to 1.5 mm The accuracy amounts to 1.5 mm - independent of distance and operating temperature. Extended temperature range An optional heater gives you the possibility to apply the DLS-B device at temperature of -40 °C up to +50 °C. Solid metal case IP65 The solid metal case effectively protects the device from ingress of dust and water. Application in an industrial environment is possible. Wide range of supply voltage You can utilize the DLS-B device within a voltage range of 9 V DC up to 30 V DC. | | Stand-alone-operation Your DLS-B device can be configured for a «stand-alone-opera-tion.» After switch-on it automatically starts measuring. This means that applications without complex control systems are possible. The DLS-B device stores all of the configuration information. External display You can connect an external display directly to the interface RS232 or RS422. External trigger Via digital input you can activate measurements from an external position. | | Serial interfaces Via interface RS232 you can connect the DLS-B device to a PC. Interface RS422 has been foreseen for industrial applications. It allows cable lengths of up to 500 meters. Connection of several DLS-B devices Via interface RS422 you can control up to 10 DLS-B devices. Analogue output 0/4 - 20 mA The analogue output assures you a simple integration in a control system. It is not necessary to Implement an interface protocol. You configure your analogue output according to your measuring range. 2 digital outputs You have the possibility to configure 2 digital outputs with different switching thresholds. An additional digital output transmits a signal in case of error. | | |