Text version of the page

1675 - MICROPRO Straightener/Feeder

- 7 x 60 mm dia straightening rolls - Individual penetration adjustment of the 3 upper straightening rolls with reading on a dial - 1 pair of 60 mm dia inlet feeding rolls + 1 pair of outlet ones - POR: upper inlet and outlet roll lifting through pneumatic cylinders + sheet release for piloting through pneumatic opening of the feeding rolls and setting of motor torque to 0 - All straightening rolls are case-hardened (60 Rck) and ground - RCS: the feeding rolls are sandblasted and hard chrome plated (70 Rck) - Lower straightening and feeding rolls motorised through a cylindrical gear pair - Motorisation through brushless motor and reduction gear free from play - Inlet strip guide made up of 2 hardened vertical rollers, manually adjustable, and 2 sheet holding rolls - 2 outlet horizontal sheet holding rolls - Base made of rolled, welded steel - CRM/T: extra pitch measurement through sensor directly placed on the sheet and supervision of the slipping value between strip and rolls

RANGE AND FEATURES

Model Width Thickness Straightening rolls Feeding rolls Weight Min. Max. Max.* Quantity Ø Quantity Ø (mm) (mm) (mm) (mm) (kg) 1675 B 300 0.6 4.0 3.0 7 60 4 60 430 1675 D 500 0.6 2.8 1.8 7 60 4 60 530 1675 F 800 0.6 1.8 1.1 7 60 4 60 680 1675 G 1000 0.6 1.4 0.9 7 60 4 60 800
Straightening capacities are given for a yield point Re = 300 N/mm² and a tensile strength Rm = 400 N/mm². * Max. thickness for max. width

DIMENSIONS

ModelL A 1675 B 300 635 1675 D 500 835 1675 F 800 805 1675 G 1000 1005
Non contractual pictures. May be modified without notice. This document is the sole property of DIMECO ALIPRESSE. It must not be communicated to third parties, nor used or reproduced without a written authorization. 05/2008 – Version 1 www.dimeco-alipresse.com