Gearpump 300 ml/min Mini Series BLDC - Diener Precision Pumps - #1

Text version of the page

Typical Performance Curve: Water at Room Temperature 0 100 200 300 400 500 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Differential Pressure (Bar) Flow Rate (ml/min) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Amperage (amps) Flow: 12 vdc Flow: 24vdc Amps: 12vdc Amps: 24 vdc Product Datasheet: 300ml/min Mini Series Document No.: PD-0015 All Diener pumps are customized to suit your requirements: the information below represents one of the possibilities... QF3222i Product Datasheet Version: 15-02-08 Engineering Released: QM Page: 1(1) • Magnetically Coupled: No seal leaks • Positive Displacement: Pulse-less flow delivery across pressure range. • Inert Construction Materials: Compatible with wide range of fluids • Mounting Versatility: Motor flange mounting with a variety of porting styles/locations None of the information supplied by Diener Precision Pumps constitutes a warranty regarding product performance or use. Any information regarding performance or use is only offered as suggestion for investigation for use, based upon Diener Precision Pump’s or other customer experience. DPP makes no warranties, expressed or implied, concerning the suitability or fitness of any of its products for any particular purpose. It is the responsibility of the customer to determine that the product is safe, lawful and technically suitable for the intended use. The disclosure of information herein is not a license to operate under, or a recommendation to infringe any patents. Pump shown with 1/8”-NPT side ports Specifications Performance: Max. continuous pressure: 4 bar Max. intermittent pressure: 6 bar Max. static Case pressure: 14 bar Inlet: Self-priming Speed range: 300-4500 rpm Fluid viscosity range: 0.3 to 1000 cps Electrical: Supply voltage: 24vdc Speed Control: 0-5vdc Tach. Output: 5 volt TTL, 2 pulses per revolution. Rotation: Clockwise Max. current: 0.8 amps Max. output power: 20 watts Current Overload Protection: 1.8 amps 4-conductor Teflon cable: 24 AWG Color code: Black = ground, Red = +24vdc, Green = Tach. Output, White = 0-5 vdc speed control Motor rating: IP-34 Temperature: Fluid temp. range: -20 to +100°C Ambient air temp. range: 0-40°C Relative humidity range: 0-95% noncondensing Construction: Standard: 316L stainless steel, PEEK®, EPDM. Optional: 304 SS, Alloy-C, PPS, Teflon®, Silicone, Viton®, Kalrez® Inlet/Outlet: 1/8” NPT (standard); Optional: 1/4-28 UNF, 1/4”-NPT, G1/8, G1/4, exiting the side, top, or end of the pump. Marking: Permanent laser-mark identification for 100% traceability. Mass: 0.8 kg The Mini series is designed for applications requiring accurate flow in a very small package size. The wetted materials and gear construction are the same as those of it’s larger cousins, but by removing one of the shaft bearings the overall length is much shorter. In addition, the magnetic coupling has been miniaturized to further reduce the overall length without sacrificing highpressure performance. The inlet and outlet port locations can be located on the side, top, or end of the pump, and are available in a variety of sizes. The brush-less DC motor has an integral flange allowing bulkhead mounting, and its IP35 rating ensures it will stand up to harsh environments.