Catalogs >
DIAB >
DIVINYCELL CY

DIVINYCELL CY
2Pages

Catalog excerpts

TECHNICAL DATA THE HIGH PERFORMANCE INSULATION FOAM Divinycell is a high strength, closed cell, co-polymer foam with excellent insulation properties. It is especially suitable as insulation in low and cryogenic temperatures, featuring very low thermal conductivity. Resistance to hydrocarbons makes it the perfect material for LNG storage insulation. Divinycell has a long track record as insulation in LNG Carriers as well as bottom insulation in land based LNG storage tanks. A special grade, Divinycell CY, is approved rigid insulation for the GTT (Gas Transport & Technigaz) NO96 design both as insulating and supporting type and have exceptional compressive properties parallell to the plane. Easy cutting and machining is another attractive feature of the foam, appreciated by manufacturers and installers. 1. Parallell to the plane 2. Not Applicable being CY33 insulating material only Nominal value is an average value of a mechanical property at a nominal density PRODUCT CHARACTERISTICS • Excellent cryogenic insulation • High mechanical properties • Resistant to hydrocarbons • Low water absorption • Closed cell • Low thermal expansion • Fast and easy to machine • Non friable • Good creep behaviour

Open the catalog to page 1

Continuous operating temperature is typically -200°C to +70°C. Maximum processing temperature is dependent on time, pressure and process conditions. Therefore users are advised to contact Diab Technical Services to confirm that Divinycell CY is compatible with their particular processing parameters. Disclaimer: This data sheet may be subject to revision and changes due to development and changes of the material. The data is derived from tests and experience. If not stated as minimum values, the data is average data and should be treated as such. Calculations should be verified by actual...

Open the catalog to page 2