1. Catalogs
  2. Detection Technology
  3. X-ray detector for baggage screening system for airport
video corpo

X-ray detector for baggage screening system for airport
1 /2Pages

X-ray detector for baggage screening system for airport

X-ray detector for baggage screening system for airport
1 /2Pages

Catalog excerpts

X-ray detector for baggage screening system for airport-1

Detection Technology, Inc. | Piisilta 1, 91100 Ii, FINLAND | Tel. +358 8 553 6600 | Fax +358 8 553 6611 | http://www.deetee.com | [email protected] X-DAQ Data acquisition and control board for X-Cards DS0000026D Features x Single +12 or +24 VDC power input for powering the complete detector system. x Cascade connection for up to 22 pcs of 64 channel dual energy detector cards or 44 single energy detector cards. x Simultaneous line integration and data read out. x 16-bit data acquisition and output. x Real-time image data connection to host computer via Ethernet, Frame Grabber or USB interface. Demonstration software and interfacing libraries available. x On-board signal processing functions. Including gain and offset normalisation, line summing or averaging. x Diagnostics functions. Including data test patterns, remote readable temperature sensor and status indicator LEDs. x Line and frame trigger inputs for optional synchronization with a complete X-ray system. Applications x Typical applications include security inspection (e.g. baggage and air cargo x-ray screening systems) and non-destructive test systems. General characteristics Minimum Maximum Input voltage 10.5 V 28 V Input current 0.2 A 2 A Input power (including detector cards) 6 W 22 W Number of detector cards (max)* Dual energy: 22 Single energy: 44 Detector cards per video channel 12 Integration time 0.75 ms 128 ms Sampling speed 7.8 lines/s 1333 lines/s Scanning speed (=belt speed with 1.5 mm pixel) 12 cm/s 200 cm/s Ethernet data rate 18 Mbps USB data rate 160 Mbps Frame grabber data rate 640 Mbps System non-linearity 1 % Mechanical dimensions 310 mm (L) x 120 mm (W) x 31 mm (H) * depending from X-card type. For larger configurations several X-DAQs can be connected in parallel X-DAQ X-DAQ is designed to be used with Detection Technology’s linear array x-ray detector cards, like X-Card 1.5-64DE. X-DAQ and detector cards together provide a complete detector subsystem for X-ray image acquisition. Typically only power supply and Ethernet need to be connected to X-DAQ. Demonstration software and interface libraries for host computer are available.

 Open the catalog to page 1
X-ray detector for baggage screening system for airport-2

Detection Technology, Inc. | Piisilta 1, 91100 Ii, FINLAND | Tel. +358 8 553 6600 | Fax +358 8 553 6611 | http://www.deetee.com | [email protected] DC 12 to 24 V Frame trigger Line trigger L-Shape housing Tunnel System PC X-ray source X-DAQ X-CARD Frame grabber cable (optional) RS-232 cable (optional) USB 2.0 (optional) Ethernet Block diagram of the detector subsystem Building blocks of a complete X-ray detector system X-View demonstration software for X-DAQ X-DAQ Data acquisition and control board for X-Cards

 Open the catalog to page 2

All Detection Technology catalogs and technical brochures

  1. X-panel 2301

    2  Pages

  2. X-panel 1214i

    4  Pages

  3. X-GCU

    2  Pages

  4. X-Scan C01

    2  Pages

  5. X-Panel 1615

    4  Pages

  6. Aurora CT

    6  Pages

  7. X-IM ME3

    2  Pages

  8. X-Card ME3

    4  Pages

  9. Aurora series

    4  Pages

  10. X-Tile

    2  Pages

  11. X-DAQ

    2  Pages

  12. X-card

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.