DSE7210-20
4Pages

{{requestButtons}}

Catalog excerpts

DSE7210-20 - 1

® YOUR LOCAL DISTRIBUTOR. DEEP SEA ELECTRONICS PLC maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. 055-050/10/09 (6) This data sheet is printed on 9lives 55 Silk, which is produced with 55% recycled fibre from both pre and post-consumer sources, together with 45% virgin ECF fibre. DEEP SEA ELECTRONICS INC 3230 Williams Avenue Rockford IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL sales@deepseausa.com WEBSITE www.deepseausa.com DEEP SEA ELECTRONICS PLC Highfield House Hunmanby Industrial Estate Hunmanby, North Yorkshire YO14 0PH England TELEPHONE +44 (0)1723 890099 FACSIMILE +44 (0)1723 893303 EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com Registered in England & Wales No.01319649 VAT No.316923457 PENDING

Open the catalog to page 1
DSE7210-20 - 2

® DSECONTROL® MONITORING WITH INTELLIGENCE. The DSE7210 and DSE7220 are control modules for single gen-set applications. The modules incorporate a number of advanced features to meet the most demanding on-site applications. The DSE7210 is an Automatic Start Control Module and the DSE7220 is an Auto Mains (Utility) Failure Control Module. The DSE7220 includes the additional capability of being able to monitor a mains (utility) supply. Both modules have been designed to start and stop diesel and gas generating sets that include electronic and non-electronic engines. Bothmodules are simple to...

Open the catalog to page 2
DSE7210-20 - 3

OPERATION The modules are operated via the START, STOP, AUTO and MANUAL soft touch membrane buttons on the front panel. The DSE7220 also has a TEST button. Both modules include load switch buttons. The main menu system is accessed using the five navigation buttons to the left of the LCD display. CONFIGURATION The modules can be configured using the front panel buttons and by using the DSE Configuration Suite PC software and a USB lead. INPUTS & OUTPUTS Analogue inputs are provided for oil pressure, coolant temperature and fuel level. These connect to conventional engine mounted resistive...

Open the catalog to page 3
DSE7210-20 - 4

® DSE7210 & DSE7220 2 AMP FUSES G M 2 AMP FUSES ELECTRICAL INTERLOCK MECHANICAL INTERLOCK LOAD CTs MUST BE 1 AMP OR 5 AMP SECONDARY PROTECTION CLASS P1 P2 S1 S2 BATTERY -VE +VE CHG ALT OIL WATER FUEL (FLEXIBLE) SENDER COMMON 6 INPUTS PLANT +VE GENERATOR LOADING RELAY OUTPUT D MAINS LOADING RELAY(7220) OUTPUT C (ALL MODELS) FLEXIBLE IF J1939 IN USE FLEXIBLE IF J1939 IN USE 4 FET OUTPUTS ENGINE ECU MPU SCR SCR H L MODULE 7210/7220 BATTERY NEGATIVE MUST BE GROUNDED TERMINALS SUITABLE FOR 22-16 AWG (0.6mm - 1.3mm ) FIELD WIRING TIGHTENING TORQUE = 0.8Nm (7lb-in) NOTE 1 THESE GROUND CONNECTIONS...

Open the catalog to page 4

All DES catalogs and technical brochures

  1. dseL401 MKII

    2 Pages

  2. DSE9462

    2 Pages

  3. DSE9480 MKII

    2 Pages

  4. DSE4510 MKII

    2 Pages

  5. DSE4610

    2 Pages

  6. DSE6110 MKII

    2 Pages

  7. DSE7110 MKII

    2 Pages

  8. dse9120-9240

    2 Pages

  9. dse860-65

    1 Pages

  10. dse330

    2 Pages

  11. dse9480

    2 Pages

  12. edv-015-1250

    2 Pages

  13. dse705-4130

    2 Pages

  14. dse330-

    2 Pages

  15. dse8700

    2 Pages

  16. dse431020

    2 Pages

  17. dse335

    2 Pages

  18. dse3210-

    2 Pages

  19. 500

    2 Pages

  20. 1000

    2 Pages

  21. DSE5310-5320

    4 Pages

  22. DSE7310-20

    4 Pages

  23. DSE7110-20

    4 Pages

  24. DSE704-4120

    2 Pages

  25. DSE705-4130

    2 Pages

  26. DSE710-720

    2 Pages

  27. DSE703-4110

    2 Pages

  28. DSE4410-20

    2 Pages

  29. DSE6110-20

    2 Pages

  30. DSE511

    2 Pages

  31. DSE512

    2 Pages

  32. DSE402

    2 Pages

  33. DSE501K

    2 Pages

  34. DSE8700

    2 Pages

  35. DSE3110

    2 Pages

Archived catalogs

  1. DSE5210-5220

    4 Pages