Catalogs >
DEPRAG SCHULZ GMBH u. CO. >
Storage Devices

Storage Devices
4Pages

Catalog excerpts

Screwdriving Technology Automation DEPRHG Storage Devices Belt-Driven Hopper for the automatic refilling of feeding systems ■ extends refill intervals ■ provides a consistent fill-volume ■ gentle part handling ■ flexible ■ low noise level and wear-resistant ■ easy to control Does your operating staff have to refill your feeding equipment to avoid a production stoppage? Or, does your feeder operate irregularly and would you like to optimize its process? For those situations, we recommend the use of our storage devices, such as the DEPRAG Belt-Driven Hopper.

Open the catalog to page 1

• Extends Refill Intervals Belt-driven hoppers are the ideal supplement to feeding systems to dramatically increase the required refill intervals. A fill-level sensor that is installed in the feeding system sends a signal to a controller when the minimum fill-level is reached. The controller activates the hopper and the feeder will be refilled through the outflow-chute until the fill-level sensor signals that the desired fill-level has been reached. According to the required fill-volume, the refill intervals may be reduced to once or twice per shift which frees-up your personnel for other...

Open the catalog to page 2

dimension X variable X 272 approx. 674 M1:10 View shows standard execution: motor position on right side 1:10 View shows standard execution: motor position on right side

Open the catalog to page 3

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved - Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 4

Storage Devices 4Pages

Catalog excerpts

All DEPRAG SCHULZ GMBH u. CO. catalogs and technical brochures

Storage Devices
4Pages