MINIMAT Screwdrivers angle head design - Screwdriver Spindles
8Pages

{{requestButtons}}

Catalog excerpts

MINIMAT Screwdrivers angle head design - Screwdriver Spindles - 1

Screwdriving Technology Automation DEPRHGMINIMAT Screwdrivers The basic solution for almost all screwdriving tasks angle head design - torque from 0.3 - 67 Nm / 2.7 to 593 in.lbs ■ highly accurate shut-off clutch ■ for limited space ■ durable ■ robust The particular strength of a MINIMAT screwdriver in angle design is that it can carry out screw assemblies with torque ranges of 0.3 Nm to 67 Nm. In these ranges you can not only assemble screws but also adjust them. The ergonomic MINIMAT screwdriver is extremely durable due to its extraordinary processing quality and design for heavy industrial use. The MINIMAT clutch works with the tried and tested principle of a mechanical separation and shut-off clutch. The highly precise shut-off clutch allows torque precision of <3% standard deviation, which is maintained for millions of assemblies. When used under the correct conditions DEPRAG pneumatic screwdrivers with shut-off clutch conform with a Cmk value of >1.67 with 15% tolerance in relation to 6 Sigma according to ISO 5393. The MINIMAT spindles can be easily integrated and are extremely small. They are available in right rotation and reversible. These tools can be used without lubrication: This should however only be done in specific applications. Using a tool without lubrication will decrease its lifespan. The DEPRAG stationary screwdriver spindles with angle head design are preferably used for assemblies in tight areas.

Open the catalog to page 1
MINIMAT Screwdrivers angle head design - Screwdriver Spindles - 2

Performance data relate to an air pressure o( 6.3 bar (90 PSI) Please find suitable accessories on page 7. Please also find suitable tool inserts in our brochure D3320E.

Open the catalog to page 2
MINIMAT Screwdrivers angle head design - Screwdriver Spindles - 3

DIMENSION SHEET Spindle right rotation Slot for torque adjustment B3 Version - E6.3 External square drive DIN 3121 E6.3 (1/4”) Spindle reversible Version - F6.3 Internal hex. drive DIN ISO 1173 F6.3 (1/4”) with quick change chuck Motor Size 2 Dimensions (mm) Type Spindle right rotation

Open the catalog to page 3
MINIMAT Screwdrivers angle head design - Screwdriver Spindles - 4

Performance data relate to an air pressure ol 6.3 bar (90 PSI) ► n. ^ , l | _____ ^ Please also find suitable tool inserts in our Please Hnd suitable accessories on page 7. > brochure D332QE

Open the catalog to page 4
MINIMAT Screwdrivers angle head design - Screwdriver Spindles - 5

DIMENSION SHEET Spindle right rotation Slot for torque adjustment External Square drive DIN 3121 - E10 (3/8”) Spindle reversible Motor Size 3 Type Spindle right rotation 377-230-7-E10 377-730-7-E10 377-330-7-E10 377-430-7-E10

Open the catalog to page 5
MINIMAT Screwdrivers angle head design - Screwdriver Spindles - 7

Included in delivery of the screwdriver Set of coupler and connector plugs ∙ Torque and adjustment tool ∙ Assortment of clutch springs Optional Equipment Motor Size 2 suitable for Part no. Part no. Exhaust connection in line with spindle 90° in relation to spindle Motor Size 3 right rotation / reversible 386924A / 386924C 386924B / 386924D Exhaust connection in line with spindle Exhaust connection 90° in relation to spindle Function Control Connection* Air Supply 6.3 bar/90 PSI 2 No Push To Start 1 Remote Start (3/2-way valve) Driver with one way rotation - right rotation. Function Control...

Open the catalog to page 7
MINIMAT Screwdrivers angle head design - Screwdriver Spindles - 8

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved - Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 8

All DEPRAG SCHULZ GMBH u. CO. catalogs and technical brochures

  1. MINIMAT-EC

    12 Pages

  2. E-SFM

    8 Pages

  3. Air Motors

    28 Pages

  4. Services

    12 Pages

  5. D6100

    8 Pages

  6. ADVANCED LINE

    40 Pages

  7. D 3550

    2 Pages

  8. D C A M

    4 Pages

  9. MINIMAT-E

    8 Pages

  10. D 6600

    48 Pages

  11. SENSOMAT

    4 Pages

  12. BASIC LINE

    8 Pages

  13. VARIOMAT

    2 Pages

  14. D 3460

    4 Pages

  15. D 3470

    2 Pages

  16. D 3520

    2 Pages

  17. D 3530

    2 Pages

  18. NANOMAT

    2 Pages