Catalogs >
DEPRAG SCHULZ GMBH u. CO. >
MICROMAT / MINIMAT-ESD-Screwdrivers straight handle design

MICROMAT / MINIMAT-ESD-Screwdrivers straight handle design
4Pages

Catalog excerpts

MICROMAT / MINIMAT-ESD-Screwdrivers straight handle design - 1

Screwdriving technology Automation Air motors Air tools MICROMAT/MINIMAT ESD Screwdriver straight design – torque ranges between 0.02 – 12 Nm      robust uninfluenceably accurate ergonomic durable quiet ESD screwdrivers are especially designed for the operation in electrostatic exposed areas, and where an ESD-safe assembly is required (specifications according to EN 100 015). The supplied conductive pressure hose allows a simple, direct and grounded connection, without the need for an additional cable-connection. Between the air-hose for the tool and the main air-outlet an insulating connector can be installed to discharge electrostatic load. Handheld Screwdriver pneumatic The extraordinary constructive quality of the slender MICROMAT/MINIMAT screwdriver and the capability to be used in a heavy industrial industrial environment, assures extreme high up-times. The MICROMAT/MINIMAT achieves its high torque-accuracy through the proven principle of the DEPRAG disengagement- and shut-off clutch. This special clutch design enables our screwdrivers to reach extreme high torque accuracy, in many cases below ±3% of the standard deviation, which is kept constant over several million of cycles. DEPRAG pneumatic screwdrivers with a shut-off clutch operated at suitable surrounding conditions achieve a Cmk value of ≥1.67 with a tolerance requirement of ±10% in relation to 6 Sigma according to ISO 5393. A Cmk value of 1.67 means that there is a failure rate of only 0.6 per one million screw assemblies. The ergonomic design of the housing allows a fatigue-proof operation at continued use.

Open the catalog to page 1

MICROMAT / MINIMAT-ESD-Screwdrivers straight handle design - 2

TECHNICAL DATA MICROMAT - straight version Screwdriver reversible, right shut-off Type Push-To-Start Part no. up to Screws Torque min. Ncm / in.oz soft pull-up max. Ncm / in.oz hard pull-up max. Ncm / in.oz Speed, idling rpm Air consumption m3/min / cfm Main body dia. mm / in. Length mm / in. Weight kg / lbs Noise level dB (A) Air hose dia. mm / in. Connector thread for air-hose Hose dia. for screw suction mm / in. Internal hex. drive DIN ISO 1173 Suitable tool inserts and connecting components with a drive as per DIN ISO 1173 Quick change chuck, mounted MINIMAT - straight version...

Open the catalog to page 2

MICROMAT / MINIMAT-ESD-Screwdrivers straight handle design - 3

TECHNICAL DATA MINIMAT - straight version Screwdriver reversible, right shut-off Push-To-Start Motor Size 2.5 Type Part no. Screws up to min. Nm / in.lbs Torque soft pull-up max. Nm / in.lbs hard pull-up max. Nm / in.lbs Speed, idling rpm Air consumption m3/min / cfm Main body dia. mm / in. Length mm / in. Weight kg / lbs Noise level dB (A) Air hose dia. mm / in. Connector thread for air-hose Internal hex. drive DIN ISO 1173 Suitable tool inserts and connecting components with a drive as per DIN ISO 1173 Quick change chuck, mounted Performance data relate to an air pressure of 6.3 bar (90...

Open the catalog to page 3

MICROMAT / MINIMAT-ESD-Screwdrivers straight handle design - 4

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved - Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 4