Z32 CNC FlorenZ Series - Master Link - I/O Peripherals - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Analog Solution ■ Up to 16 Z-Link analog axes CENTRAL UNIT Z-Link Peripherals 8 Axes Digital Solution • Up to 8 SPevo digital axes ■ Up to 16 Z-Link analog axes CENTRAL UNIT Real Time Z-Link Peripherals 16/32 Axes Digital Solution ■ Up to 16/32 (*) SPevo digital axes ■ Up to 16 Z-Link analog axes CENTRAL UNIT Real Time EXP-FZ1:1 additional Z-Star2 channel, up to 16 analog axes and up to 16 SPevo digital axes EXP-FZ3:3 additional Z-Star2 channels, up to 16 analog axes and up to 32 SPevo digital axes D.ELECTRON srl - Via Reginaldo Giuliani 140 - 50141 Firenze - Tel. +39 055 416927 - Fax +39 055 434220 - delectron@delectron.it The extremely flexible CNC system, suited for any exigency ^^^^^^M MASTER LINK (MLK-FZ) ^^^H The Master-Link (MLK) card, that includes a permanent RAM memory, manages the data exchange between the central unit of the Z32 CNC FlorenZ Series and all the peripherals (servodrives and l/O's). • RTE (Real Time Ethernet): connection with the Z32 CNC central unit • Z-Link: optical fiber bus for digital l/O's, analog references, analog inputs, encoder inputs (2ms sampling time) • Z-Star2: optical fiber bus for SPevo digital servodrives (250 us sampling time) RTE Real Time Ethernet Z-Link optical fiber Master Link Master Link+EXP-FZI ■ Allows PE3 modules mounted beside ' Doesn't allow PE3 modules mounted beside ■ Doesn't allow PE3 modules mounted beside In case no expansion card (EXP-FZ1, EXP-FZ3) is present, up to 8 PE3 I/O modules can be connected directly to the Master-Link, like PE3 modules directly connected to the Master Link

 Open the catalogue to page 1

Z-LINKI/O PERIPHERALS Z-Link Peripherals All the I/O peripherals of the Z32 CNC FlorenZ Series are connected to the Master-Link (MLK) card through the optical fiber Z-Link bus. Z-Link characteristics: • Supported up to 25 Z-Link nodes of any type, in any order • Maximum connection length between two consecutive nodes: 30 m • The optical fiber is totally immune to any kind of electrical noise, allowing a complete conformity of this bus to the EMC norms. GPIO board, general purpose interface • The GPIO board is a special peripheral for managing data exchange with an external CPU through serial or...

 Open the catalogue to page 2

All D.Electron catalogues and technical brochures

  1. Z32 SOLO CNC

    2 Pages

    En
  2. Z32 SLIM SYSTEM

    2 Pages

    En
  3. SOLO

    2 Pages

    En
  4. MOTOR DIMENSIONS

    1 Pages

    En
  5. Z32 SLIM SYSTEM

    2 Pages

    En
  6. DSM Series

    1 Pages

    En

Archived catalogues