Swirl-Air™ Nozzles
16Pages

{{requestButtons}}

Catalog excerpts

Swirl-Air™ Nozzles - 2

2INTRODUCTION SWIRL-AIR > PRODUCT BROCHURE >

Open the catalog to page 2
Swirl-Air™ Nozzles - 3

Delavan are pleased to offer thebrand new Swirl-Air The Delavan Swirl-Air > range of spray nozzles, based on aerospace technologyand developed within our Gas Turbine Division was designed to maximise hydraulic and pneumatic energy to atomize liquids at relatively low pressures. Originally designed for use in evaporative cooling, spray drying and combustion, they have since been used in many other industrial applications from Food to Steel production. Different spray angles are available; flow rates can be changed by adjusting air and liquid pressure and the degree of atomization controlled...

Open the catalog to page 3
Swirl-Air™ Nozzles - 4

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:10.00pt "Arial", sans-serif; } .font3 { font:11.00pt "Arial", sans-serif; } .font4 { font:12.00pt "Arial", sans-serif; } .font5 { font:14.00pt "Arial", sans-serif; } .font6 { font:15.00pt "Arial", sans-serif; } .font7 { font:16.00pt "Arial", sans-serif; } .font8 { font:18.00pt "Arial", sans-serif; } .font9 { font:23.00pt "Arial", sans-serif; } .font10 { font:29.00pt "Arial", sans-serif; } .font11 { font:10.00pt...

Open the catalog to page 4
Swirl-Air™ Nozzles - 5

s Humidification Air/Gas (or steam) is introduced tangentially into the nozzle chamber inlow pressure region of the swirling liquid, creating extreme turbulence and primary atomization. As liquid leaves the orifice, it impinges against the deflector ring which serves a dual purpose; close control of spray angle and break up of the spray into even finer droplets (secondary atomization).Eight sizes of nozzle are available covering flow rates from 1-2400 GPH.Nominal spray angles of 50, 75аand 100can be attained by the specification of interchangeable nozzle caps. Contact the factory for...

Open the catalog to page 5
Swirl-Air™ Nozzles - 7

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:11.00pt "Arial", sans-serif; } .font5 { font:12.00pt "Arial", sans-serif; } .font6 { font:16.00pt "Arial", sans-serif; } .font7 { font:9.00pt "Lucida Sans Unicode", sans-serif; } Spray Technologies www.delavan.com Concentre Inlet Version Right Angle Concentric Inlet Nozzle Sizing Chart Concentric Inlet Nozzle Assembly Dimensions...

Open the catalog to page 7
Swirl-Air™ Nozzles - 15

Air Inlet Thread Nipple Fluid Inlet Adaptor (IncludesNipple with Oђ Ring)BodyCapAssy. To Suit Customer Requirements > SWIRL-AIR ֮ PRODUCT BROCHURE SIRL-AIR LITE NOZZLE 15 size="-1">

Open the catalog to page 15
Swirl-Air™ Nozzles - 16

Delavan can also enhance current designs or simplymanufacture products from existing designs. We can provide cooled or heated lances, support special mounting flanges, by-pass or purge systems to meet every industry standard. Contact the factory for more information... DelavanҒs Delavan offers a variety of production services to best meetyour needs. For new systems, we will handle each stage of development from preliminary design to servicing the product. extensive experience goes beyond just the nozzlewith a full range of engineered support for spray lances. > MARKETINGALCHEMY 0845 3004340...

Open the catalog to page 16

All DELAVAN SPRAY TECHNOLOGIES catalogs and technical brochures

  1. Maxi

    2 Pages

  2. PU

    1 Pages

  3. CL7

    1 Pages

  4. DFBT

    1 Pages

  5. DFAN

    1 Pages