You may also be interested in
Measurement software, Field probe, Probe, Software, Signal generator
Text version of the page
Technical Specifications
RadiLink® RF analog fiber optic link
Performance
Frequency Range : 9 kHz – 3 GHz
Input/Output impedance : 50 Ohm
Frequency response : ± 3 dB max. (typical ± 2 dB)
Dynamic Range : > 80 dB (typical 85 dB)
Connectors (input and output) : SMA
Link loss : +0 dB gain
Noise figure : Typical 17 dB @ 100 MHz
VSWR (input) : 2GHz better than 1:2,5
VSWR (output) : Better than 1:2
Environmental conditions
Temperature range : 15° to 35° Celsius
Relative humidity : 10 – 90% (non-condensing)
Compliance : EMC (EN61326); Low voltage (EN61010), LASER safety (IEC60825)
Immunity to radiated fields : 200 V/m (10 kHz – 3 GHz)
Power
Supply voltage (remote unit) : Internal battery pack, 7.2V / 150mAh or with optional LASER Power
Autonomy : 10 hour battery operation time or continuously with LASER Power Supply
Charge time battery : 2,5 hours
Mechanical
Dimensions (remote unit) : 120 mm * 50 mm * 30 mm (L*W*H)
Weight : Approx. 200 gram
Optical
LASER power (1&2) : Max. 0,5 Watt output at aperture, 808 nm (only for LASER power supply)
Digital LASER (control unit) : Max. 2 mW, 1310 nm
Digital LASER (remote unit) : Max. 2 mW, 1550 nm
Analog LASER (remote unit) : Max. 5 mW, 1310 nm
Connectors : FC/PC (LASER power), SC/PC (digital data), E2000/APC7 (analog data)
Standard fiber length : 25 meter
Safety
LASER product classification : Class IIIb
Safety measures : LED indications for LASER ON, Audible warning signals and Redundant
closed loop safety system
LASER switch on/off time : Approx. 10 ms
Models
RLK1003A : RadiLink® plug-in card for RadiCentre®
RLK1003B : RadiLink® battery powered remote unit
RLK1003D : RadiLink® LASER powered remote*
* Requires the LPS1002B LASER power plug-in card
More information
For more information contact:
D.A.R.E!! Instruments at:
+31 (0)348 41 65 92 or instruments@dare.nl
Internet: www.dare.nl
Copyright© 2006 - 2010 All rights reserved by D.A.R.E!! Instruments
RadiLink-UK – 2010 April - version 3.0b Specifications are subjected to changes without notice.
Dijkstra Advies, Research & EMC Instruments B.V.
Vijzelmolenlaan 7 – NL-3447 GX Woerden - The Netherlands
Tel: +31(0)348 41 65 92, Fax: +31 (0)348 49 97 32
Internet: www.dare.nl
E-mail: instruments@dare.nl
Distributed by:
|
|