WS403-J
2Pages

MAKING MODERN LIVING POSSIBLE Data Sheet WS403-J Remote solution Remote Connection to PLUS+1® Mobile Machine Control Systems The Danfoss WS403-J Remote Solution is Plug and Perform compliant with the PLUS+1® family of mobile machine management products. The WS403-J allows PLUS+1® Service Tool access to a mobile machine’s PLUS+1® control system from locations remote to the machine. The WS403-J provides the same functionality that is available when a laptop running the PLUS+1® Service Tool is directly connected to the machine using the Danfoss CG150 CAN/USB Gateway. Wireless Communication The WS403-J Remote Solution consists of a wireless gateway with SIM card and antenna. The gateway plugs into the machine’s CAN communication bus and may be permanently mounted on the machine or used as a temporary diagnostic tool. WS403-J device drivers are embedded in the PLUS+1® Service Tool. The final user can decide the preferred data service plan subscription. Remote Machine Control Access The WS403-J allows remote upload and download of machine application tuning parameters, remote downloads of application software to machine PLUS+1® controllers and displays and remote access to machine vault memory. yy Easy-to-Install enclosure yy lug and Perform integration with PLUS+1® Service P Tool yy upports temporary or permanent machine S installation yy nterfaces with programmable PLUS+1® compliant I hardware to: –– View checkpoint data –– Upload and download parameters –– Reflash applications –– Read vault memory yy Internet-based fleet management and remote diagnostic with Danfoss Telematics Solutions yy Real Time Clock with Backup Capacitor with backup time 24 hours (typical @25 °C) yy Global Positioning System (GPS, GLONASS and BeiDou) for real time positioning and data stamping yy Global System for Mobile (GSM) wireless communication, UMTS, and HSDPA yy GSM/GPS combined antenna with mounting flexibility yy 1 CAN bus (ISO 11898-2 High Speed, 2.0A/B) supports machine CAN bus bit rates up to 1 MB per second yy 3-axis accelerometer yy Micro-SD Card interface yy TELEC certification compliant yy Remote Solution Kit includes remote Gateway, antenna and cable yy IP 65 ingress protection degree yy Access to CAN data, the device enable to display, monitor, record and analyze data of mobile and stationary CAN bus systems from anywhere yy WS403-J supports standard and sleep (energy saving) power modes yy The software WS System Tool enables the user to easily adapt the configuration of WS403-J to the most diverse applications, update the firmware and to configure the devices remotely yy Danfoss Telematics Solutions allows for numerous telematics applications: near real time access to CAN data, Web Portal solution with comprehensive functionalities (data reporting / analysis , geo tracking, geo fencing, optimizing routes and processes …) The WS Remote Solution requires GSM data connectivity in area(s) the device will be located. As it is customary with cellular services, GSM data coverage may be subject to bad cells or unavailability in certain areas. Verify the available current wireless service car

Data Sheet Power supply Power supply Dig-IN / Terminal 15 Blue Input (ignition) Gray, green Connector J-1 pinouts information Mechanical data Additional Features Device Type RTC Real Time Clock with Backup Capacitor Accelleration sensor Standard housing Aluminum, powder-coated Operating Temperature range Storage Temperature range IP 65 with all connectors plugged in Status LEDs (2 colors) Software and Web Portal WS System Tools Ordering Information Telematic unit Supply Voltage Controller MCU EMI/RFI rating Power input (operating /sleep mode) Part numbers Interface / Protocols /...