Geometry - Damalini - #1

The Easy-Laser® systems have been developed on the basis of more than 20 years' experience In solving measurement and alignment problems, and are manufactured In accordance with strict quality requirements*. Every part of the systems Is designed to withstand the most demanding environments and to be easy to operate when carrying out measurements. The versatile design tackles all types of measurements quickly and accurately, with a resolution of 0.001 mm [0.05 mils/thou].

The basic Idea behind the measurement system Is that It should be simple to use and adapt for each measuring task. Depending on the choice of laser transmitter, the standard systems cover most requirements, but you can also expand your system with accessories and adapt It to the specific situation, as most of the parts have extra fixing holes, etc. The only limitation Is your own Imagination!

There are two main options for putting together a measuring system for geometrical measurements:

1. Start with an Easy-Laser® D600 basic system for geometry, with a 2-axls detector, and add a suitable laser transmitter and other accessories. This Is the best option if you will not be measuring and aligning rotating machines.

2. If, In combination with alignment of machine tools, you are also working on alignment of rotating machines (e.g. pumps, motors, gearboxes, cardan-shaft-coupled machines), we recommend starting with the Easy-Laser® D525 shaft alignment system Instead and adding a suitable laser transmitter and other accessories. If you are unsure which would be best for you, consult your Easy-Laser® dealer.

For measuring Flatness, Stralghtness, Squareness, Parallelism and Spindle Direction. The laser beam can sweep 360° with a measurement distance of 40 metres [130'] in radius. The beam can be deflected at 90° to the sweep, within 0.01mm/m [0.5 mils/thou],

PartNo.: 12-0022

For measuring Spindle Direction and Straightness. Can be used in a rotating spindle (max. 2000rpm). Mounting pins with different diameters can be used. The mounting pin can be fitted at either end, for use when aligning bar feeders, for example. Measurement distance 20metres [65'].

Part No.: 12-0146

For measuring Straightness and Spindle Direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance 40metres [130']. (Also available as a special version with a measurement distance up to 80 metres [260'].)

PartNo.: 12-0075

"Damalini AB's quality system is approved by Nemko (Notification Number Nemko 05ATEX4428O) asfollows: "NemkoAS, notified body number 0470 for Annex VII In accordancewlth Article 9 of Council Directive 94/9/EC of March 1994 notifies to the applicant that the actual manufacturer has a product quality system which complies with Annex VII of the Directive."