Text version of the page

SSEELLFF--CCOONNTT AIINN SSEENNSSOORR SS A YSSTTEEMM Y

Self contain sensors - 59258 :: TTRR ANNSSMMIITTTTEERR TTSS1100 A

ANNDD A

RREECCEEII VEERR RRSS1100 V

FULL CONTROL WITH FREEDOM:

Adjustable range 0-12 m Low Hysteresis 3 sensor housing types Fully sealed IP 67 Foreign light up to 50.000 Lux

Small dimensions and extensive reach

The combination of extremely small sensor dimensions Ø10 L 30 mm and a reach of up to 12 m; fitting into any machine even in locations with very poor accessibility.

Intensive to dirt and dust

A dirty/dusty environment is not normally associated with the use of photo cells. Only Ø5 mm of the sensor’s Ø10 mm surface forms is sensitive to the light. This creates a light sensitivity, which results in an easy surface dirt/dust penetration.

Setting and vibrations

Due to severe vibration and over long distances during an installation and operation, the usage of optical sensors is often connected with major setting and operational difficulties. The TS10/ RS10 sensor series are fully sealed in order to ensure tightness (IP 67) and prevent from operational errors. The optical design ensures opening angles to be controlled and sensor settings to be simplified even over long distances. IInnssttaallllaattiioonn aanndd ddiirreecctt ssyysstteemm APPLICATIONS: Objects that refract optical connection between TS10 and RS10 make the output change its status. Use the intensification wire on the TS10 to determine what kind of objects is detected. IInnssttaallllaattiioonn ooff pprrooxxiimmiittyy sseennssoorrss Objects that pass in front of the sensors TS10 and RS10 and create an optical connection make the RS output change its status. Adjust the proper range on TS10. IInnssttaallllaattiioonn wwiitthh ddaazzzzlliinngg bbaacckkggrroouunndd If TS10 and RS10 are installed in an angle the system reach will be reduced enabling the system to be used, e.g. height detection. The settling is optimised by an intensification wire TS10. RReefflleexx mmiirrrroorr iinnssttaallllaattiioonn Other opposite reflection, an optical connection will be established by TS10 and RS10 installed next to each other. Any object that passes in between the mirror and the sensors makes the RS10 output change its status. Adjust the sensitivity properly. Be aware of a certain proximity sensor effect as the sensors do not employ lenses.
High power ensors ““SShhoooott aarroouunndd aa ccoorrnneerr”” iinnssttaallllaattiioonn Other installations could be by one or several mirrors: install one or several mirrors to direct the beam from the transmitter to the receiver. Ever y p assa g e of the mirror will activate the out p ut.
Intensive to Dirt and Dust version