video corpo

Pipette Management Solutions
8Pages

{{requestButtons}}

Catalog excerpts

Pipette Management Solutions - 1

Pipette Management Solutions by A&D For quick checking of pipette airtightness… To protect research results from the threat of nonconformities For verification of pipette accuracy and precision… Pipette Accuracy Testers: BM Series + BM-014, etc. For easy implementation of daily and periodic pipette checks…

Open the catalog to page 1
Pipette Management Solutions - 2

What If You Were Told to Create a Pipette Management SOP * Within Three Weeks? 1 1 *1 Standard Operating Procedure Today, what with GLP and ISO, researchers are in increasing need of sustainable ways to verify the quality and performance of their pipettes in-house. The problem is, however, that many of them would be at a loss as to what exactly they should put into actual practice. Wouldn’t you be too? Not to worry, though. A&D provides the following powerful solutions that you can use to introduce a simple, viable SOP for pipette management. Leak Tester Pipette failures typically occur due...

Open the catalog to page 2
Pipette Management Solutions - 3

Advantages ✔ Takes only seconds to tell whether the pipette has a leak ✔ Changes pressure by evacuating air instead of injecting it*2, so that no dust enters the pipette being tested ✔ Easily replaceable air filter, which protects the AD-1690 from dust when it intakes air ✔ Equipped with an RS-232C interface to output test results to an external device such as the AD-1695 Pipette Professional (see later pages) ✔ Four attachments and one adapter tube provided to fit various tip sizes and shapes *2 A pressurization method is available upon request. Pipette Accuracy T esters AD-4212A-PT...

Open the catalog to page 3
Pipette Management Solutions - 4

Advantages ✓ Automatic mass-to-volume conversions and judgments for accuracy and repeatability using the special “WinCT-Pipette" software ✓ Judgments by your preferred criteria - manufacturer specifications, ISO8655, or your own ✓ Outputs the test results in an A4 or letter-size report format for documentation requirements ✓ A liquid thermometer, evaporation trap, and calibration weight with a pair of tweezers included as standard ✓ Comes packed neatly in a handy carrying case for use in multiple places*4 *5 *4 For the AD-4212B-PT, AD-4212A-PT, and FX-300i-PT only *5 Not advisable when...

Open the catalog to page 4
Pipette Management Solutions - 5

Also available... Micro Analytical Balances Pipette Accuracy Testing Kit The BM-014 can be used with any model of the BM series (both 5 mL and 30 mL cups are provided). This setup is ideal if you also want to use the balance for purposes other than pipette accuracy testing as an ordinary analytical balance. Recommended Models in Accordance With ISO8655 ♦ 1 The maximum volume selectable for variable volume pipettes ♦2 Please select the BM-20/22 + BM-014 if you will mainly use the 0.001 mg range, as it will provide much greater stability. ♦3 The minimum weighing value, 1 mg, approximately...

Open the catalog to page 5
Pipette Management Solutions - 6

… Still not comfortable enough with what you should do? Then how about getting some professional help? Pipette Professional Stop dwelling on how to put the said tasks and tools in order by yourself. Leave everything to the AD-1695. All you have to do is follow the displayed instructions and touch the screen to enter necessary information, commands, selections, etc., so you can perform daily and periodic checks in ways already laid out by A&D for you. Daily check (basic check) function For daily checks, you are simply asked to determine whether the condition is “met” or “not met” for each...

Open the catalog to page 6
Pipette Management Solutions - 7

Periodic check (volume test) function The AD-1695 enables you to easily test for pipette volume accuracy and repeatability by connecting it to one of A&D’s balances*8. All the key functions provided by WinCT-Pipette are also available on the AD-1695, so that you can complete both the basic check and volume test one after another without using a PC. *8 Either the pipette accuracy testers or the BM series with BM-014 are strongly recommended, as they come with an evaporation trap and other useful accessories. Reporting results The daily and periodic check results can be output to a USB flash...

Open the catalog to page 7
Pipette Management Solutions - 8

Specifications AD-1690 (Leak Tester) Options & Accessories AD-1690-01 Replacement tube set (Adapter x 1, attachment x 4, adapter tube x 1) AD-1690-02 Replacement filter set (Filter unit x 1, filter element x 10) AD-1690-015 Carrying case *i AD-1682 Rechargeable battery unit AD-1688 Weighing data logger *u *i For the AD-1690 and its AC adapter with additional space for the AD-1682 *ii Leak test data can also be stored *iii Please refer to the dedicated brochure for the specifications of the BM series of micro analytical balances. *iv When the balance weighing pan is used *v The...

Open the catalog to page 8

All A&D COMPANY catalogs and technical brochures

  1. LC1205-USB

    2 Pages

  2. CMX-USB

    1 Pages

  3. LCC20

    1 Pages

  4. AD-4329A

    4 Pages

  5. AD-4401A

    4 Pages

  6. AD-4402

    6 Pages

  7. AD-4408C

    2 Pages

  8. AD-4410

    6 Pages

  9. AD-4403FP

    4 Pages

  10. AD4413-CW

    2 Pages

  11. AD4412-CW

    6 Pages

  12. AD-4531B

    2 Pages

  13. AD-4530

    2 Pages

  14. LCM13 Series

    2 Pages

Archived catalogs