BOOST 6010 cyanoacrylate adhesive primer strengthens the adhesion of Apollo adhesives to non-polar plastics such as polypropylene and polyethylene. BOOST 6010 also increases the bonding ability of other difficult substrates such as silicone rubber and polytetrafluoroethylene. BOOST 6010 can be applied to surfaces by wiping, brushing, or spraying and contains no chlorinated or fluorinated solvents. Skin Contact: Wash exposed areas with copious amounts of soap and water for 15-20 minutes. Prior to use: See Material Safety Data Sheet > BOOST 6010 is highly flammable and should be stored away from heat, open flame, or ignition sources. Products should be stored unopened in a cool, dry place out of direct sunlight. > The data contained herein are furnished for information only and are believed to be reliable. Cyberbond L.L.C. cannot assume responsibility for the results obtained by others over whose method Cyberbond L.L.C. does not control. It is the users responsibility to determine suitability for the product or of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, > Cyberbond L.L.C. specifically disclaims all warranties of merchantability or fitness for a particular purpose arising from sale or use of Cyberbond L.L.C. products. Cyberbond L.L.C. specifically disclaims any liability for consequential or incidental damages of any kind, including loss of > profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Cyberbond L.L.C. patents which may cover such processes or compositions. We recommend that each prospective user test the proposed application to determine its suitability for the purpose intended prior to incorporating any product or application in its manufacturing process using the data as a guide. > NOTE: May adversely affect some plastics and other materials. Test First. > NOT FOR PRODUCT SPECIFICATIONS. THE DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY. PLEASE CONTACT CYBERBOND L.L.C. TECHNICAL DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS. CYBERBOND L.L.C. BATAVIA, IL 60510 PHONE: 630-761-8900 FAX: 630-761-8989

APOLLO BOOST 6010 can be applied on plastic substrates by brushing, dipping, or spraying. After evaporation, the substrates can be bonded by APOLLO adhesives. After application of the adhesives, the bonding will occur by a short contact pressure. Polymerization will start within a short period of time; initial strength will be obtained after a few seconds. Final strength is achieved in most applications of non-polar plastics such as polyethylene and polypropylene when using APOLLO adhesives after a cure time of 24 hours. After application of the APOLLO BOOST 6010 primer, the primed substrates...