Browning® Mounted Ball Bearings
8Pages

Browning® E920 Series Tapered Roller Bearing Browning® 920 series mounted tapered roller bearings feature one-piece durable cast iron non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation and contact face riding seals to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations as illustrated on the pages to follow. Locking Collars Tapered Roller Bearing Locking Collars Rubber Contact Seal Outer Race One-Piece Cast Iron Housing Rubber Contact Seal

Housing Assembly Housing Type PB - Pillow Block FB - Four Bolt Flange TU - Take-Up Series E920 - Setscrew Pillow Block Bolts F - Four Bolts Bore Size (Inches) Nominal & Actual Adjustments (Inches) Take-Up Frame Series 1000 - Center Pull (TUE920) Compatible Range D - Up to 2”

Features and Benefits Mtd. Tapered Bearings Tapered Roller Bearings Browning® E920 Series mounted tapered roller bearings are available from 1 3/16” to 5” in a two and four bolt pillow blocks, four bolt flanges and take-up housing styles. All units are completely assembled, adjusted and lubricated at the factory and are ready for use. Heavy Duty Tapered Roller Bearings Heavy duty tapered roller bearings for radial, thrust and combination loading. One-Piece Cast Iron Housing Durable one-piece cast iron housings provide support load. Contact Seal Rubber contact face riding seals rotate with...

PBE920 Series Two and Four-Bolt Base Pillow Blocks *Type LN and SR are different internal mounting configurations as shown in line drawings. Metric dimensions for reference only. Not all parts are available from stock. Bearing Selection Features & Benefits Technical Engineering

E920 Series Bearings Rolling Elements: Housing: Lock: Seal: Temperature: Tapered Roller Cast Iron, Four Bolt, Flange Block Setscrew, Double Collar Contact -20°F to 200°F FBE920 Series Four-Bolt Flange Units Type* *Type LN and SR are different internal mounting configurations as shown in line drawings. Metric dimensions for reference only. Not all parts are available from stock. Bearing Selection Features & Benefits Technical Engineering

Rolling Elements: Housing: Lock: Seal: Temperature: Tapered Roller Cast Iron, Take Ups Setscrew, Double Collar Contact -20°F to 200°F TUE920 Series Take Up Units Bore Part Numbers are specified by TUE 920 and bore size: Example, TUE920 x 1 3/16. These Take-Up Bearings are to be used with Take-Up Frames shown on page I-45 and I-46. Bearing unit and frame must be ordered separately. * Take -Up frames not available in these sizes. Bearing Selection Features & Benefits Technical Engineering

E920 Series Bearings Housing: All Steel Take-Up Frame, Removeable Top Permits Assembling Of Take-Up Unit On Shelf Before Inserting In Take-Up Frame Part Numbers are specified by “T1000” with travel adjustment and bore size. Example 12-16.6T1000 has 12”-16.6” adjustment and will accommodate a TUE920x 2 7/16” or USTU5000-207 bearing unit. These Take-Up Frames are to be used with TUE Take-Up Units shown on page I-44 and USTU Take-Up Units shown on page H-21. Bearing unit and frame must be ordered separately. Frames give greater ACTUAL adjustment, often permitting use of shorter, more compact...

Housing: All Steel Take-Up Frame, T1000 Take Up Frames Continued Bore Part Numbers are specified by “T1000” with travel adjustment and bore size. Example 12-16.6T1000 has 12”-16.6” adjustment and will accommodate a TUE920x 2 7/16” or USTU5000-207 bearing unit. These Take-Up Frames are to be used with TUE Take-Up Units shown on page I-44 and USTU Take-Up Units shown on page H-21. Bearing unit and frame must be ordered separately. Frames give greater ACTUAL adjustment, often permitting use of shorter, more compact frames. Frames with over 12” nominal adjustment have a third foot in the...