Catalogue Curtain Dock Shelters
www.crawfordsolutions.com
print switch display
Page / 6
Make a request   
Crawford Group - 89010, 5071, 81389
/ 6
See other catalogues for Crawford Group
Text version of the page
ID Crawford
Optimum sealing
Best insulation properties
Best suited for temperature controlled warehouses
651
Unbroken cold chain!
The food industry puts high demands on loading bay sealing in order to keep the cold chain as intact as possible. The dock shelter must provide continuous weath­er protection throughout the entire load­ing and unloading operation. Like a industrial glove, the Crawford inflatable dock shelters tight­en around the vehicle, preventing air inlet. Customer demands are fulfilled!
Rolling top seal for large variations in vehicle height
A special inflatable shelter model has been developed in order to cope with large varia­tions in vehicle height. The top seal is a roller design — automatically activated for low or high vehicles. In addition, it follows all vertical movements of the docked vehicle, continuously providing high tightness.
Simplified dock-in navigation
In rest position, the inflatable dock shelter is completely retracted behind the side structures, giving the vehicle driver the possibility to use the complete width of the loading bay when reversing into it. In addition, yellow front line indicators further facilitate dock-in navigation. Stable collision protectors at ramp height prevent shelter damages.
Insulated top and side panels
The inflatable dock shelter is installed into a frame construction covered by insulated panels, giving additional insulation effects.
The design facilitates easy and fast com­ponent exchange, should this be needed.
Special ground model for no-ramp applications
Normally, dock shelters are installed at dock level, but sometimes a loading ramp is not available. For such applications, a special model of the Crawford inflatable dock shel­ter is supplied, giving the same high tight­ness around the entire door opening all the way down to ground level.
High quality material composition
The side and top inflatable airbags are made of impact resistant material with a strong, woven core. It is non-flammable, color stable and highly resistant to weather impacts — in other words a material well suited for optimal function in rough docking environments.
Technical data
Continous cooling
Nominal length
3420 to 4800 mm
Nominal width
3250, 3350, 3450 mm
Nominal depth
770, 1020, 1080 mm
For high and low lorries
Activated position Resting position
81
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
pdf-page pdf di En 2008-10-42-14