DS-EIS00000B
4Pages

SHEET EIS Ethernet Switch — UL 864 Compliant For Fire Alarm Systems All Ethernet Interconnect Switch models offer UL 864 compliance as Component Control Units and Accessories for Fire Alarm Systems. The EIS8-100T offers eight ports for twisted-pair cabling. If greater distance or galvanic isolation is required, three models offer two fibre ports to accommodate a fibre backbone and four twistedpair ports for local drops. Both the EIS6-100T/FC and the EIS6-100T/FT use multimode fibre. The EIS6-100T/FCS uses single-mode fibre. Each twisted-pair port automatically optimises its data rate to 10 Mbps or 100 Mbps. The data rate of fibre ports is fixed at 100 Mbps. Each port negotiates flow control with the PAUSE function for full-duplex links and the backpressure scheme for half-duplex links. The switch front-panel features LEDs for link status, port activity, and data rate of each port. All units operate from low-voltage AC or DC power and are DIN-rail or panel mountable. Plug-and-Play Functionality • Auto-negotiated data rate, duplex, flow control, and cabling, on copper ports Full- or half-duplex operation on copper ports Standards Compliant • UL 864 9th Ed. Recognized Component — Control Units and Accessories for Fire Alarm Systems UL 508 Listed, Industrial Control Equipment C-UL Listed, CSA 22.2 No. 14-M91, Industrial Control Equipment RoHS compliant Industrial environment EMC comp

Underwriters Laboratories 864 Recognized Component Contemporary Controls has recently re-qualified the EIS Series to comply with UL 864 Control Units and Accessories for Fire Alarm Systems 9th Edition. All new fire alarm and smoke control systems being installed claiming UL 864 compliance must comply with this latest edition. The UL recognized component mark is rarely seen by the customer but is often part of a larger endproduct that is UL Listed by the fire alarm system supplier. For an end-product to be listed, UL tests the product to determine that it meets the requirements UL’s published...

Specifications Power Requirements Operating Temperature Storage Temperature Relative Humidity TS-35 DIN-rail or panel mounting via extendable brackets Shipping Weight Ethernet Communications IEEE 802.3 10/100 Mbps data rate 10BASE-T and 100BASE-TX using RJ-45 connectors, 100 m (max) 100BASE-FX multimode using SC or ST connectors, 2 km (max) 100BASE-FX single-mode using SC connectors, 15 km (max) Regulatory Compliance UL 864 9th Ed. Recognized Component, Control Units and Accessories for Fire Alarm Systems ULC-S527-11 Control Units for Fire Alarm Systems UL 508 Industrial Control Equipment CE...

Power Considerations Applied voltage must be within the specified range and deliver a current commensurate with power consumption. The recommended size for solid power conductors is 16–20 AWG; and for stranded conductors use 16–18 AWG. Zero volts (COM) is isolated from chassis (earth). Input connections are reverse-polarity protected. Connecting chassis to earth or using a backup source is always optional. AC Powered with Battery Backup AC Powered with Grounded Secondary Typical Installations Ordering Information Model Four-port 100BASE-TX/two-port 100BASE-FX (multimode) UL-864 switch with...