CONTEG catalogue of products - edition 2007 - CONTEG - #5

/ 88


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for CONTEG
You may also be interested in

Rack cabinet, Server cabinet, Cabinet, Enclosure


Text version of the page
Description:
• Produced in sizes 15-48U
• Width 600 or 800mm »
• Depth 600, 800, or 1000mm
• Frame construction; 1.5mm, 2mm sheet steel
• Color powder coated RAL (standard RAL 7035, 9005)
See page 62 - Vertical wire management
Door with swivel handle lock (single or multipoint); optionally cylinder or digital code lock, other locks on
request »
Wide variety of doors: tinted security glass door (as standard front door); optionally steel, perforated
steel, vertically divided doors etc. Rear panel with module for cable entry as standard;
optionally can be replaced by full range of doors (see front door options) »
Reversible door - easy re-hanging to open on right or left
(at installation site)
Door opening angle 180o
Removable side panels with lock; easy access to installed devices, security, and fast installation and dismantling Top, bottom, and rear openings for cable entry
(300x100mm) covered with removable blank panels;
racks 800mm wide have two additional covered cable
entry openings (300x100mm) in both, top and bottom
frames
Top and bottom openings for ventilation units covered
with removable blank panels Top frame perforated for effective ventilation Ventilation unit can be installed in top or bottom frame
See page 68 - Ventilation units
• Four sliding 19" vertical extrusions
• Possibility to adapt 800mm wide racks for installation of 21" equipment (on request)
• Adaptor DP-RE-01 used for modification of 19" accessories for 21" mounting
• Adjustable feet as standard; castors, lockable castors, plinth, or plinth with filter optionally
See page 74 - Plinths
• GND/earthing kit »
• Load rating max. 400kg balanced load; 600kg optionally
• Standard protection rating IP30; optionally IP54,
IP20 when perforated doors used
• Racks can be installed in blocks
See page 72 - Connecting kit
Standard equipment:
2 pairs of 19" sliding vertical extrusions
1 pair of side panels with lock
Tinted security glass front door (EN 12150-1
with swivel handle lock
4 adjustable feet
Rear panel with module for cable entry
GND/earthing kit 28 mounting kits
X CGtTIG
5

pageCatalog pdf di En 2012-02-07-16