G Series Products Catalog Ver.1 - CONTEC

Catalogue G Series Products Catalog Ver.1

www.contec.com

Page

/ 28

/ 28

See other catalogues for CONTEC

Text version of the page

New Products

Industrial Computer Products

96-pin Hail-Pitch

Non-Isolated

PC,

PCI

[LabVIEW

Windows Driver

Linux Driver

[LabVIEW

Windows Driver T Linux Driver

TTL-level Digital I/O GDIO-48D2-PCI

TTL-level Digital I/O

GDIO-6464T2-PCI

PICMG PCI

5" Little PICMG1.3

ANALOG I/O

C D E F

PCI

• 48 Bi-dIrectional TTL-level digital I/O, I825u iviuue 0- compliant

• TTL-level digital I/O supports Fast response time (within 200nsecs)

• All Input signals can be used as interrupts

• Digital filtering function can be set via software

• Interrupt trigger edge of input signals can be set via software

• 64 TTL-level Input, 64 TTL-level output

• 16 Input signals combine to one Interrupt as INTA

• Fast response time (within 200nsecs)

CD¹

COMMUNI! PCI

68-pin 0.8mmPitch

Non-Isolated

37-pin D-SUB.

Ivdtagelpclarity

Windows Driver

[LabVIEW

Windows Driver T Linux Driver

TTL-level Digital I/O

GDIO-96D2-LPCI

Reed Relay Output

GRRY-16C2-PCI

UNIT

CASE

• 96 Bi-directional TTL-level digital I/O

• 96 input signals combine to one interrupt as INTA

• Fast response time (within 200nsecs)

• Digital filtering function can be set via software

• Interrupt trigger edge of input signals can be set via software

. 16 reed relays output

. Relay rating - 125VAC/30VDC 2A/ch

Tl CD

CD CO

£■

CD CO


			GDIO-48D2-PCI	GDIO-96D2-LPCI
Input channels		64	48		-
Output channels		64	48	96	16
	Type	TTL-level (negative logic)	TTL-level (positive logic)		-
Input specifications	Signal Level	5VDC			-
Input specifications	Interrupts	16 interrupt signals combine to one interrupt request signal as INTA	48 interrupt signals are arranged into a signal output of interruput sinal INTA. An interrupt is generated at the falling edge (HIGH to LOW)or rising edge (LOW to HIGH).	96 interrupt signals combine to one interrupt request signal as INTA	-
	Resistance	Pull-up:10kQ (1TTL load)	10kO	Pull-up:33Q(1TTL load)	-
Output	Type	Open Collector (negative logic)	TTL-level (positive logic)		Reed Relay Contact (1-make contact)
specifications	Rating	30VDC 40mA (per channel)	IOL=24mA(Max.) IOH= -15mA(Max.)		-
Response Time (Max.)		200n m sec			7msec
Internal Power		-
Wiring Distance		Approx. 1.5m (according to cable)
I/O Address		Any 32-byte boundary	Any8-byte boundary	8 bits x 32 ports boundary(Common to I/O part)	Any 32-byte boundary
Power Consumption (Max.)		5VDC 450mA	5VDC 600mA	5VDC 950mA	5VDC 550mA
Bus / Dimensions (mm)		PCI(32bit,33MHz,5Vor3.3V*')/121.69(L) x 105.68(H)	PCI(32bit,33MHz,5Vor3.3V¹)/174.13(L) x 105.68(H)	PCI(32bit,33MHz,5Vor3.3V¹)/119.91(L) x 63.41 (H)	PCI(32bit,33MHz,5Vor3.3V*')/121.69(L) x 105.68(H)
Connector		HDRA-E100W1L-FDT1EC-SL [HONDA Tsushin Kogyo] or equivalent	PCR-E96LMD+ [HONDA] or equivalent. PHS-50S-03 [WANHSG ENTERPRISES] or equivalent	HDRA-E68W1LFDT1EC+ [HONDA] or equivalent	37-pin female D-type: DCL-J37SAF-20L9 [JAEJ pr equivalent
	Software	-
Options	Accessories	DTP-3(PC)³,DTP-4(PC)³,DTP-64(PC),EPD-37A³	□ ICT-96S'⁴, DICT-96F'⁴, EPD-96A*⁴		DTP-3(PC),DTP4(PC),EPD-37A«EPD-37«
Options	Accessories	EPD-37³,EPD-96²,CM-64(PC)E²,CCB-96²	□TP-64(PC)'⁴		DICT-37S«⁵, DICT-37F«⁵
	Cables / Connetta	PCA100PPCB100/96PS.PCB100WS	PCB96PS-0.5P,PCB96PS-1.5P,PCB96P-1.5,PCA96PS-0.5P, PCA96PS-1.5P.PCA96P-1.5,DT/F4,PCA50J-1.5,CN5-H96F	PCB68PS-0.5P,PCB68PS-1.5P,PCB68PS-0.5P,PCB68PS-1.5P	PCA37P,PCB37S,PCA37PS,PCB37PS,CN5-D37M

Note:

*1: +5V power must be supplied from PCI bus slot. *2: Requires use of optional cable PCB100/96PS *3: Requires use of optional cable PCB100WS

*4: Requires use of optional cable PCB96P-1.5, PCB96P-0.5 or PCB96PS-1.5P *5: Requires use of optional cable PCB37P or PCB37PS

-14

www.contec.com