| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | http://www.contec.com For the latest information, visit our web site. | | |
| | | |
| | | I | | |
| | | The Expanding Potential of F&eIT Network Devices | | |
| | | |
| | | |
| | | | | |
| | | Media Converter Series | | |
| | | |
| | | |
| | | Wireless LAN Micro Access Point | | |
| | | Network Devices | | |
| | | |
| | | |
| | | PLC Link Server | | |
| | | |
| | | iEEE802.11a/b/g 54Mbps FX-DS540-APDL | | |
| | | |
| | | FX-DS540-APL | | |
| | | |
| | | ¡ AC adapter included j | | |
| | | FX-DS540-APDL | | |
| | | |
| | | • Devices with a built-in (wired) Ethernet communication port can be converted to wireless irregardless of OS or protocol. • The unit can be used as an access point for small-scale wireless LAN systems. • A UTP cable power supply (sold separately) is available. • Indicated figures are logical maximum values according to wireless LAN standards, and do not indicate the actual data transmission speeds. | | |
| | | |
| | | Examples of | | |
| | | |
| | | |
| | | Embedded 10/100 M Auto-recognition Switching Hub | | |
| | | |
| | | SH-8008(FIT)GY HI | | |
| | | |
| | | | | | | | | | | | | | Item | Specifications | | | | Ethernet Standard | IEEE8023/IEEE8023u-compliant | | | | Communication method | All ports, full-/half-duplex (auto-switching) | | | | Flow Control | Full-duplex : IEEE8023x-compliant flow control Half-duplex : Back pressure | | | | Number of Available Ports | 8 (1 port used also for uplink) | | | | Switching Method | Store & Forward | | | | Address Table | 8,192 entries | | | | Power Consumption | 5VDC ±5% 1.2A(Max.) (Use of F&eIT Series power supply or third-party stabilizing power supply recommended) | | | | Operating Temperature / Humidity | 0° to 50°C, 10 to 90% RH (no condensation) | | | | Dimensions (mm) | 52.4 (W) x 64.7 (D) x 94.0 (H) (excluding protrusions) | | | | Weight | 250g | | | | | | | | | |
| | | Installation on DIN rail | | |
| | | |
| | | This ultra-compact and lightweight general-purpose switching hub is ideal for embedded use. Although designed for use with F&eIT systems it can also be used when integrating industrial system networks. • Equipped with eight 10M/100 M auto-switching ports (one can serve as an uplink port) • Equipped with 35 mm DlN rail mounting mechanism • FG terminal power input connector | | |
| | | |
| | | |
| | | Remote PLC Management PLC Link Server | | |
| | | |
| | | For monitoring and updating remote Plcs using an Intranet or the Internet. | | |
| | | |
| | | PLC Link Servers | | |
| | | |
| | | |rs-232c type» SVR-PLCLC(FIT)GY ffl | | |
| | | |
| | | SVR-PLCLD(FIT)GY | | |
| | | RS-422 type | | |
| | | |
| | | |
| | | | | | | | | | Supported PLCs | | | | MITSUBISHI general-purpose PLC MELSEC-Q Series | | | | Link Unit | QJ71C24 (supported protocol: 4C Frame, Form 4) QJ71C24-R2 (supported protocol 4C Frame, Form 4) | | | | CPU Unit | Q00, Q00J, Q01, Q02, Q02H, Q06H, Q12H, Q25H | | | | | | | | | |
| | | You can get and update PLC internal register information from any computer on the network. You can also monitor the operating status of remote PLCs or update set values over an Intranet or Internet. | | |
| | | |
| | | |
| | | 11 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |