| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Industrial Automation Products Measurement and Control Products | | |
| | | |
| | | Analog I/O Buffer amplifier box ■ Analog F Series | | |
| | | Box-PCs | | |
| | | |
| | | | | |
| | | Connector ofCables | | |
| | | Connector ofDevices | | |
| | | |
| | | Accessory | | |
| | | Flat Panel Displays | | |
| | | |
| | | |
| | | |
| | | Terminal Unit(Up-screwtype) EPD-96A | | |
| | | Connector of Cables | | |
| | | Connector of Devices | | |
| | | Accessory | | |
| | | |
| | | | | | | | | | | | | | | Connector of Boards | Shielded Cable | Connector of Accessories | | | | | n | | PCB96PS-0.5P PCB96PS-1.5P (C_ ^ ss | | n | | | | | | y | | Flat Cable | | y | | | | | 96-pin Half Pitch (F) | PCB96P-1.5 £». ^^^^^^ >> | 96-pin Half Pitch (F) | | | | | | | | | | | | | | | | | | | |
| | | Silicon Disk Drives | | |
| | | |
| | | |
| | | Buffer amplifier box (32 channels type) ATBA-32F *3 | | |
| | | |
| | | |
| | | Terminal Unit EPD-96 | | |
| | | Option | | |
| | | |
| | | |
| | | |
| | | I | | I | | |
| | | Box PCs &Panel PCswith Windows CE | | |
| | | Screw-type Terminal Block jtf? DTP-64(PC) | | |
| | | T | | |
| | | |
| | | Buffer amplifier box (8 channels type) ATBA-8F *3 | | |
| | | 96-pin Half Pitch (M) | | |
| | | |
| | | 96-pin Half Pitch (M) | | | 96-pin Half Pitch (M) | | |
| | | BNC Terminal Unit ATP-32F | | |
| | | |
| | | |
| | | | |
| | | Chassis / Backplane | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | BNC Terminal Unit ATP-8 *1*2 | | |
| | | Analog I/O | | |
| | | |
| | | |
| | | Digital I/O | | |
| | | |
| | | Connector of Boards | | |
| | | Shielded Cable | | |
| | | Serial Communication GPIB Communication | | | |
| | | |
| | | PCA96PS-0.5P PCA96PS-1.5P | | |
| | | |
| | | |
| | | Flat Cable | | |
| | | |
| | | Remote I/O | | |
| | | 96-pin Half Pitch (F) | | |
| | | |
| | | PCA96P-1.5 | | |
| | | |
| | | Expansion Unit / Bus Adapter | | |
| | | |
| | | |
| | | Software | | |
| | | |
| | | *1: Up to eight analog input channels *2: Up to four digital input, four digital output, and one counter I/O channel *3: Optional AC adapter "POA200-20" is required. | | |
| | | Distributed Monitors Control Network: F&elT Multi-Programmable Display Wireless LAN Remote Monitoring Solution Service & Products | | |
| | | |
| | | Cables | | |
| | | |
| | | Shielded Cable with connector on both sides (Mold Type) for 96-pin Half Pitch Connector PCB96PS-0.5P (0.5m) | | Flat Cable with connector on both sides for 96-pin Half Pitch Connector PCB96P-1.5 (1.5m) | | Alligator Clip (60cm) | | |
| | | |
| | | BNC-W60 | | |
| | | |
| | | |
| | | |
| | | PCB96PS-1.5P (1.5m) | | |
| | | |
| | | Shielded Cable with connector on one side (Mold Type) for 96-pin Half Pitch Connector PCA96PS-0.5P (0.5m) | | Flat Cable with connector on one side for 96-pin Half Pitch Connector PCA96P-1.5 (1.5m) | | |
| | | BNC cable | | |
| | | |
| | | BNC-B100 (1m) | | |
| | | |
| | | Analog I/O | | |
| | | |
| | | PCA96PS-1.5P (1.5m) | | BNC-B200 (2m) | | |
| | | Digital I/O | | |
| | | |
| | | |
| | | Counter & Motion Controller | | |
| | | BNC-B300 (3m) | | |
| | | |
| | | |
| | | Communication | | |
| | | |
| | | [ | | |
| | Accessories | | |
| | | |
| | | |
| | | Buffer amplifier box (32 channels type) | | Buffer amplifier box (8 channels type) | | AC Adapter POA200-20 | | |
| | | |
| | | |
| | | ATBA-32F | | ATBA-8F | | |
| | | |
| | | (Input: 90 to 264VAC, Output: 5VDC 2.0A) | | |
| | | |
| | | This product prevents the crosstalk while analog signals of low response speed sources arebeing inputted to the analog input board/card. 110{W)x70(D)x22<H) mm (Exclusive of protrusions) Non-isolated, Input power voltage -10V to +10V Single eng input 32 channels, differential input 16 channels Consumption of electric current 5VDC, 0.85A(Max.) I Terminal Unit (M3 Screw, 96-pin™ EPD-96A_ 196.5(W)*64(D)*48(H) mm 35mm DIN-rail Mountable The screw of Up-screw type terminal cannot be missing. * Cables optional | | This product prevents the crosstalk while analog signals of low response speed sources arebeing inputted to the analog input board/card. 110(W)x70(D)x22(H) mm (Exclusive of protrusions) Non-isolated, Input power voltage -10V to +10V Single eng input 8 channels, differential input 4 channels Consumption of electric current 5VDC, 0.3A(Max.) | | |
| | | |
| | | Terminal Unit EPD-96 | | Screw-type Terminal Block DTP-64(PC) 170(W)*122(D)x20(H) mm * Cables optional | | |
| | | |
| | | 219.5(W)*64(D)*35.5(H) mm 35mm DIN-rail Mountable Terminal pitch: 8.5 mm * Cables optional | | |
| | | |
| | | |
| | | Global Portal : www.contec.com | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |