Catalogue CONTEC Products Catalog Ver.11 Part L - Serial Communication Products
www.contec.com
print switch display
Page / 14
CONTEC - 2197, 81633, 81157, 14018
/ 14
See other catalogues for CONTEC
Text version of the page
automation Products
Pictograms
Bus Specifications
Board Size
■PCI
Express
Product is PCI Express standard compliant and can be used in the computer equipped with PCI Express bus expansion slot.
Product is PCI standard/Low Profile compliant. A bracket for standard-size PCI slots is provided.
Low Profile
Productis PCI standard compliantand can be used in the computer equipped with PCI bus expansion slot.
PCI
Supported Connectors
Serial
Communications
78-pin D-SUB
37-pin D-SUB
9-pin D-SUB
Product is USB standard compliant and can be used in the computer equipped with USB2.0/1.1 ports. Supports USB2.0 high-speed mode(480Mbps).
USB
2.0
44-pin
D-SUB
25-pin
D-SUB
Indicates the number ofpins and shapes ofconnectors used for external connection. The supported cables and accessories will vary depending on these specifications.
CONTEC provides awide varietyofcablesand accessories to suit your needs, such as Branch cables for 9-pin/25-pin D-SUB, etc.
SERIAL
COMMUNICATIONS
Provides PC with RS-232C/422/485 serial communication ports.
Used as a communication interface with measurement devices, barcode readers, industrial AV equipment, INDUSTRIAL UPS, industrial printers and industrial modems which are equipped with RS-232C/422A/485 serial communication port.
Product supports Cardbus that is a 32-bit PC card standard bus.
Card Bus
Cables and connectors
Communication standard / Number of channels
Equipped with the indicated number of RS-232Ccompliant ports
RS-232C
1 Xch I
Equipped with theindicated numberofRS-422Aand RS-485-compliant
RS-422A/485
Xch
Maximum transfer speed
Maximum transfer speed that can be set
XXX bps
Supported softwares
Windows Driver
Includes Standard COM driver for Windows.
Linux Diver
Standard COM driverforLinuxCOM Setup Disk isalsoincluded.
I Standard COM Driver / COM Setup Disk
Software for installing serial communication board in the operating system.Serial communication devices installed using COM Setup Disk will be recognized as standard PC serial ports (COM1, COM2...) when using Windows or Linux. Commercial applications that support serial ports can then be used.
Points
Features electric isolation between each channel as well as between communication lines and the PC. This prevents damage and malfunction from both signal interference between channels and communication line noise.
All communication lines are equipped with surge protection circuits to prevent damage and malfunction caused by incoming voltage and current surges.
Individual Isolated
Surge
Protection
Global Portal : www.contec.com
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
Contents table
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14