| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | Box-PCs | | |
| | | These boards commun i cate pulse tra i n input and pulse number count functions to the PC. They calculate addition and/or subtraction of count values onboard and read out current count values when needed. They can connect to incremental rotary encodes, linear gauges, pulse-output type industrial flowmeters or power meters. | | |
| | | |
| | | Counter | | |
| | | | | |
| | | |
| | | |
| | | | | |
| | | |
| | | Counting ON/OFF of contact points and switches | | Measurement of individual | | |
| | | Silicon Disk Drives | | |
| | | |
| | | sensors | | |
| | | |
| | | |
| | | |
| | | Option | | |
| | | |
| | | Input of ON/OFF signals | | input of pulse signal | | |
| | | Box PCs &Panel PCswith Windows CE | | |
| | | |
| | | |
| | | Product Lineup I You can choose from a variety of interface boards according to your desired bus, I/O points and I/O type. | | |
| | | |
| | | Chassis / Backplane | | |
| | | |
| | | |
| | | Analog I/O | | |
| | | Page where product can be found | | |
| | | |
| | | |
| | | Digitai I/O | | |
| | | |
| | | CNT-3208M-PE | | |
| | | 10MHz | | |
| | | |
| | | |
| | | Serial Communication GPIB Communication | | |
| | | CNT-3204MT-LPE | | |
| | | 10MHz | | |
| | | |
| | | |
| | | TTL input: 1MHz Isolation input: 500kHz | | |
| | | CNT24-4(PCI)H | | |
| | | |
| | | |
| | | Remote I/O | | |
| | | |
| | | |
| | | Expansion Unit / Bus Adapter | | |
| | | CNT24-4D(PCI)H | | |
| | | 1MHz | | |
| | | |
| | | |
| | | |
| | | Software | | |
| | | 32-bit Up/Down Counter | | |
| | | |
| | | CNT32-8M(PCI) | | |
| | | 10MHz | | |
| | | |
| | | Accessories & Cables Distributed Monitors Control Network: F&elT Multi-Programmable Display | | |
| | | |
| | | |
| | | ■4'' | | |
| | | |
| | | CNT32-4MT(LPCI) | | |
| | | 10MHz | | |
| | | |
| | | |
| | | |
| | | CNT32-4MT(CB) ¡K-03 CNT24-2(USB)GY |K-05^ | | |
| | | 10MHz | | |
| | | |
| | | 500MHz | | |
| | | |
| | | |
| | | TTL input: 1MHz Isolation input: 500kHz | | |
| | | |
| | | Bus Specifications | | Board Size | | |
| | | |
| | | |
| | | | | Product is USB standard compliant and can be used in the computer equipped with USB2.0/1.1 ports. Supports USB2.0 high-speed mode (480Mbps). | | Product is PCI standard/Low Profile compliant. A bracket for standard-size PCI slots is provided. | | |
| | | PCI Express | | Product is PCI Express standard compliant and canbeusedinthe computer equipped with | |
| | | Low Profile | | |
| | | USB 2.0 | |
| | | Counter | | |
| | | |
| | | |
| | | |
| | | Number of Channels | | |
| | | |
| | | |
| | | ip | | PCI Express bus expansion slot. Product is PCI standard compliant and can be used in the computer equipped with PCI bus expansion slot. | | |
| | | |
| | | |
| | | |
| | | Maximum number of input channels for pulse signals | | |
| | | Counter | | |
| | | PCI Express | | |
| | | |
| | | Product supports Cardbus that is a 32-bit PC card standard bus. | | |
| | | iXXch 1 Points | | |
| | | |
| | | Card Bus | | |
| | | |
| | | |
| | | PCI | | |
| | | |
| | | |
| | | |
| | | |
| | | PC Card | | |
| | | |
| | | A level input circuit in which differential receiver is used as input terminal. While it is not insulated from external circuit, it supports high-speed pulse input. Also noise- resistant, it allows for longdistance transfer. A current input circuit in which an opto-coupler (cathode side)is used as the inputterminal.Isolated from external circuits, it can prevent electric disturbance. A level-input circuit in which a TTL-IC (base) is used as the input terminal. While not Isolated from external circuits, it enables high-speed pulse input. Delays the count processing by the specified length of time.Bypreventing incorrectcounting induced by noise such as chattering, it ensures precise operation. During differential input, an error alarm is issued upon detection ofa signalwire disconnection.(Status, interrupt, external output) The input interface is equipped with a Zener diode which prevents damage and malfunction induced by voltage surges and incoming current. Large sampling data can be transferred promptlyto PC memory without going through CPU. | | |
| | | Differential | | |
| | | Supported Connectors | | |
| | | |
| | | Input | | |
| | | USB | | |
| | | |
| | | |
| | | |
| | | CONTEC provides a wide variety of cables and accessories to suit your needs. I Cables with connectors on both ends I Accessories (Terminal block, etc.) | | |
| | | 96-pin Half Pitch | | 37-pin D-SUB | | |
| | | SA | | |
| | | Isolated Input | | |
| | | |
| | | |
| | | The supported cables and accessories will vary depending on these specifications. Indicates the number ofpins and shapes of connectors used for external connection. Supported softwares | | |
| | | Motion Controller | | |
| | | |
| | | |
| | | |
| | | TTL Input | | |
| | | Lineup | | |
| | | Cables with a connector on one end Connector set | | |
| | | |
| | | |
| | | |
| | | PCI | | |
| | | |
| | | |
| | | Digital Filter | | |
| | | SA | | |
| | | |
| | | | | |
| | | Windows Driver | | API-TOOL Drivers for Windows are provided. The license-free driver software
| | |
| | | |
| | | |
| | | (both development and runtime) provides commands to interface boards or cards usingWindows standard Win 2API function (DLL). API-TOOL Drivers for Linux are provided. The license-free driver software (both development and runtime) that provide commands to interface boards or cards usingmodule-style device drivers and the shared library. VI-DAQ, a VI library for use with National Instruments' LabVIEW can be downloaded from our Web site. With function format similar to that of LabVIEW's "Data acquisition VI", VI-DAQ set-up is not complicated therefor simplifying device operation. For the details, please visit: http//ww.contec.com/mldaq/ | | |
| | | Detection | | |
| | | Linux Diver | | |
| | | |
| | | |
| | | Surge Protection | | |
| | | LabVIEW | | |
| | | |
| | | |
| | | Bus Master | | |
| | | |
| | | |
| | | |
| | | Global Portal : www.contec.com | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |