| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Industrial Automation Products Measurement and Control Products | | |
| | | |
| | | Box-PCs | | |
| | | |
| | | | | |
| | | | | |
| | | |
| | | |
| | | Flat Panel Displays | | |
| | | |
| | | Enables PC controlled output of pulse train according to a specified pulse number and frequency. Can automatically output control pulse which corresponds to operation parameters such as target position, speed and acceleration / deceleration rate. Limit input functions [required for positioning control] are also provided. For use with pulse-input type stepping motors or industrial servo motors. | | |
| | | Silicon Disk Drives | | |
| | | |
| | | Motion control | | |
| | | |
| | | Option | | |
| | | |
| | | Box PCs &Panel PCswith Windows CE | | |
| | | Pulse signal output | | |
| | | |
| | | |
| | | | | |
| | | |
| | | |
| | | Chassis / Backplane | | |
| | | |
| | | Analog I/O | | |
| | | Product Lineup | | |
| | | |
| | | |
| | | Digital I/O | | |
| | | You can choose from a variety of interface boards according to your desired bus, I/O points and I/O type. | | |
| | | |
| | | |
| | | age | | |
| | | |
| | | Serial Communication GPIB Communication | | |
| | | SMC-4DF-PCI | | |
| | | |
| | | |
| | | SMC-8DF-PCI | | |
| | | Remote I/O | | |
| | | |
| | | |
| | | jK-0» | | |
| | | Expansion Unit / Bus Adapter | | |
| | | SMC-4DL-PCI | | |
| | | |
| | | |
| | | Software | | |
| | | JK-08^ | | |
| | | |
| | | SMC-8DL-PCI | | |
| | | Accessories & Cables Distributed Monitors Control Network: F&elT Multi-Programmable Display Wireless LAN Remote Monitoring Solution Service & Products | |
| | | |
| | | |
| | | jK-0» | | |
| | | SMC-2P(PCI) | | |
| | | |
| | | |
| | | JK-09^ | | |
| | | SMC-4P(PCI) | | |
| | | |
| | | |
| | | |
| | | Motion Controller 3 Axis | | |
| | | SMC-3(PC) | | |
| | | 92~6Mpps | | |
| | | |
| | | |
| | | |
| | | K-06 | | |
| | | |
| | | Counter | | |
| | | |
| | | Pictograms | | |
| | | |
| | | Lineup | | |
| | | |
| | | Bus Specifications | | Supported Connectors | | Number of Channels | | |
| | | PCI Express | | |
| | | |
| | | |
| | | Product is PCI standard compliant and can be used in the computer equipped with PCI bus expansion slot. | | Maximum number of controllable channels | | |
| | | Motor Control | | |
| | | 96-pin Half Pitch | | |
| | | PCI | | |
| | | |
| | | |
| | | 1 XXchI rXXch] Points | | |
| | | |
| | | |
| | | | PC Card | | |
| | | Maximum number of input channels for pulse signals | | |
| | | |
| | | The supported cables and accessories will vary depending on these specifications. Indicates the number of pins and shapes of connectors used for external connection. CONTEC provides a wide variety of cables and accessories to suit your needs. ■ Cables with connectors on both ends I Accessories (Terminal block, etc.) | | |
| | | USB | | |
| | | |
| | | |
| | | ISA | | |
| | | Supported softwares | | |
| | | |
| | | |
| | | |
| | | You can store a maximum of 1,000 frames [1 frame gathering information necessary for single positioning such as speed, acceleration/ deceleration rate and target position]. Detects the stop point, deceleration point and origin point of the motor for high-level positioning control. | | |
| | | Motion Controller | | |
| | | Frame Data Store | | |
| | | Windows Driver | | |
| | | |
| | | |
| | | API-TOOL Drivers for Windows are provided. The license-free driver software (both development and runtime) provides commands to interface boards or cards using Windows standard Win32API function (DLL). | | |
| | | |
| | | |
| | | PCI | | |
| | | |
| | | Cables with a connector on one end | | |
| | | | | |
| | | |
| | | |
| | | Connectorset | | |
| | | Input | | |
| | | ISA | | |
| | | |
| | | |
| | | |
| | | |
| | | Synchronization control for multiple simultaneous start/stop control commands is available. A bundled synchronization control cable makes it possible for synchronization control in up to 16 boards. *1: Compatible with both SMC-4DF-PCI and SMC-8DF-PCI type boards. *2: Only one type of board can be used with any single synchronization control cable. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |