| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Industrial Automation Products Measurement and Control Products | | |
| | | |
| | | Please see page Q-13 for optional accessories and cables/connectors, and page P-01 for supported software. | | |
| | | |
| | | High I Digital I Non Voltage I Filter I polarity | | |
| | | Input | | Output | | |
| | | 37-pin D-SUB | | |
| | | Box-PCs | | |
| | | |
| | | Isolated | | |
| | | PCI | | |
| | | |
| | | |
| | | |
| | | |
| | | | | |
| | | LabVIEW I | | |
| | | Windows Driver | | Linux Diver | | |
| | | |
| | | |
| | | |
| | | Flat Panel Displays | | |
| | | High-voltage Non-polar Opto-Isolated I/O PIO-16/16RY(PCI) | | |
| | | |
| | | Silicon Disk Drives | | |
| | | 16 semiconductor relay output Input/output supports both current sink and current source output Supports high-voltage input range -12 to 48VDC / output - 120VAC/VDC All input signals can be used as interrupts Digital filtering function to prevent input error caused by noise and/or chattering | | |
| | | |
| | | |
| | | Option | | |
| | | |
| | | Box PCs &Panel PCswith Windows CE | | |
| | | |
| | | Output | | |
| | | High Non Voltage polarity | | |
| | | 37-pin D-SUB | | |
| | | |
| | | Isolated | | |
| | | |
| | | |
| | | Chassis / Backplane Analog I/O | | |
| | | |
| | | Windows Driver | | Linux Diver | | LabVIEW | | |
| | | |
| | | | | |
| | | |
| | | 0 16 independent reed relay outputs • Output ratings can handle up to 125VAC/30VDC - 2A / channel • Connector pin assignment compatible with RRY-16C(PCI) | | |
| | | |
| | | Serial Communication GPIB Communication | | |
| | | |
| | | |
| | | Output | | |
| | | High Non Voltage polarity | | |
| | | 37-pin D-SUB | | |
| | | |
| | | Isolated | | |
| | | Remote I/O | | |
| | | PCI | | |
| | | |
| | | |
| | | |
| | | |
| | | Expansion Unit / Bus Adapter | | |
| | | |
| | | Windows Driver | | Linux Diver | | |
| | | LabVIEW | | |
| | | |
| | | |
| | | |
| | | Reed Relay Output Board RRY-32(PCI)H | | |
| | | Software | | |
| | | |
| | | 0 32 reed relay outputs • Output ratings can handle up to 100VAC/VDC and 500mA per channel, 1A per common (max) for total of 8 points and 10VA (10W) • Connector pin assignment is compatible with RRY-32(PC) | | |
| | | Accessories & Cables Distributed Monitors Control Network: F&elT Multi-Programmable Display Wireless LAN Remote Monitoring Solution Service & Products | | |
| | | |
| | | |
| | | |
| | | J-15 | | |
| | | |
| | | | | | | | | | | | | | Model | PIO-16/16RY(PCI) | RRY-16C(PCI)H | RRY-32(PCI)H | | | | | Input channels | 16 | | | | | | | Output channels | 16 | 32 | | | | | | Type | Opto-Isolated (for sink/source current output) | - | | | | | Input specifications | Signal Level 12~24VDC, 24~48VDC Each point can be set. | - | | | | | Interrupts | 16 interrupt signals combine to one interrupt request signal as INTA | - | | | | | | Resistance | 3kfl<12~24VDC>, 6kfi<24~48VDC> | - | | | | | | Type | Semiconductor Relay | Reed Relay Contact (1-make contact) | | | | | | Rating | 120VAC/VDC 100mA | - | | | | | Output | Maximum Power - | 125V(AC), 30V(DC) | 10V(AC), 10V(DC) | | | | | specifications | Maximum Switching Curren | - | 2A (Max.) | 0.5A (Max.) | | | | | | Contact Resistance - | 30m£2 or less | 100mß or less | | | | | | Life Expectancy | - | Min.20 million times (Swithing Freq. 180times/min) Min. 200 million times | | | | | Response Time (Max.) | Input: 200^sec Output: 1.0msec | 7msec | 1msec | | | | | Internal Power | - | | | | | Wiring Distance | 50m | | | | | | | I/O Address | Any 32-byte boundary | | | | | | | Power Consumption (Max.) | 5VDC 400mA | 5VDC 550mA | 5VDC 1050mA | | | | | Bus / Dimensions (mm) | PCI (32bit, 33MHz, 5V or3.3V*1)/ | PCI (32bit, 33MHz, 5V or 3.3V*1 )/ | PCI (32bit, 33MHz, 5V or 3.3V*1)/ | | | | | 176.41(L) x 105.68(H) | 121.69(L)*105.68(H) | 176.41(L)*105.68(H) | | | | | Connector | | 37-pin female D-type DCLC-J37SAF-20L9 [JAE] or equivalent | | | | | | | Software | - | | | | | Options | Accessories | DTP-3A *2, DTP-4A *2, EPD-37A*2, EPD-37*2, CM-32(PC)E*2 | DTP-3A*2, DTP-4A*2, EPD-37A*2, EPD-37*2 | | | | | | Cables / Connectors | PCA37P, PCB37P, PCA37PS, PCB37PS, CN5-D37M | | | | | | | | | | | | | | |
| | | Lineup | | |
| | | |
| | | PCI Express | | |
| | | |
| | | Low Profile PCI | | |
| | | |
| | | PC Card | | |
| | | |
| | | USB | | |
| | | |
| | | CompactPCI | | |
| | | |
| | | SA | | |
| | | |
| | | |
| | | Note: | | |
| | | *1: +5V power must be supplied from PCI bus slot. | | *2: Requires use of optional cable PCB37P or PCB37PS. | | |
| | | |
| | | |
| | | As shown on the side of product's images, RoHS compliant C J) is a CONTEC original marking for RoHS-compliant products. | | |
| | | |
| | | Global Portal : www.contec.com | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |