CONTEC Products Catalog Ver.11 Part I - Analog I/O - CONTEC - #1

Industrial Automation Products

Product is PCI Express standard compliant and can be used in the computer equipped with PCI Express bus expansion slot.

Product is PCI standard/Low Profile compliant. A bracket for standard-size PCI slots is provided.

Product is PCI standard compliant and can be used in the computer equipped with PCI bus expansion slot.

Product is USB standard compliant and can be used in the computer equipped with USB2.0/1.1 ports. Supports USB2.0 high-speed mode(480Mbps).

Indicatesthenumberofpinsand shapesofconnectors used for external connection. The supported cables and accessories will vary depending on these specifications.

CONTEC provides a wide variety of cables and accessories to suit your needs.

Product supports Cardbus that is a 32-bit PC card standard bus.

|Q-01^

ICables with connectors on both ends Accessories (Terminal block, etc.)

Cables with a connector I on one end Connector set Q-05

Interface modules that convert analog signals to digital data. Converting analogue signals to data (digital signals) and feeding them to PC allows you to measure external events, whereas converting PC data to analogue signals for output allows you to control external devices.

Maximum number of channels of analog signals that can be input

Maximum numberofchannelsof analog signals that can be output

Maximum number of points (bits) of digital signals that can be input / output

Maximum number of channels of counter signals that can be input

API-TOOL Drivers for Windows are provided. The license-free driver software (both development and runtime) provides commands to interface boards or cards using Windows standard Win32API function (DLL).

API-TOOL Drivers for Linux are provided. The license-free driver software (both development and runtime) that provide commands to interface boards or cards using module-style device drivers and the shared library.

C-LOGGER can be downloaded from our Web site.

C-LOGGER, is a Windows version of data logger software for CONTEC's analog I/O device products. C-LOGGER provides true data collection and monitoring function, such collected signal data graph drawing, zoom observation, file saving, and dynamic transfer to Excel (spreadsheet program). Once you have an eligible CONTEC's analog I/O device product and C-LOGGER installed on your PC, C-LOGGER allows you to startcollecting and monitoring data ofinterestimmediatelyaftersetting a setofsampling conditionseasily via asetup wizard (interactive program)withoutanyneed forannoying programming. For the details, please visit: http//ww.contec.com/clogger/

Sensor Measurement through Voltage/ Current input signa

ML-DAQ library software for use with MATLB can be downloaded from our Web site. ML-DAQ is library software which allows you to use CONTEC's analog input / output boards with the MathWorks' MATLAB software. This library along with MATLAB and MATLAB's Data Acquisition Toolbox, allows you to control CONTEC boards using MATLAB and to import measurement data directly into MATLAB's environment for analysis.

For the details, please visit: http//ww.contec.com/mldaq/

VI-DAQ, a VI library for use with National Instruments' LabVIEW can be downloaded from our Web site. With function format similar to that of LabVIEW's "Data Acquisition VI", VI-DAQ set-up is not complicated therefor simplifying device operation. For the details, please visit: http//ww.contec.com/mldaq/

Photo-couplers and isolation amplifiers are used to isolate the PC from the external I/O circuit preventing electrical disturbances. Useful when wiring environment is susceptible to noise generation and there is concern about noise or malfunction of the host PC.

Uses high-speed A/D converter (or D/A converter)for faster analog input (or output) than other products.

Bus isolation, photo-couplers and isolation amplifiers are used to isolate I/O channels from each other preventing interference between each channel. Implements correct sampling even when channel connection devices have different ground levels.

UseshighlypreciseA/D converter(orD/A converter) for higher precision analog input (or output) than other products.

Motor control through the output of voltage / current signals

Input range can be set within a micro-signal range (±0.125V, 0-0.25V), Sensor output that has a small surge can be sampled with high precision.

Large sampling data can be transferred promptly to PC memory without going through CPU.

Product is equipped with data storage buffer memory for analog I/O. It allows for high-speed real-time sampling independent of the processing powerofthe PC.

Global Portal : www.contec.com