CONTEC Products Catalog Ver.11 Part D&E - Silicon Disk & Options - CONTEC - #1

/ 4


catalogue search
CONTEC Products Catalog Ver.11 Part D&E - Silicon Disk & Options - CONTEC
P. 01
CONTEC Products Catalog Ver.11 Part D&E - Silicon Disk & Options - CONTEC
P. 02
CONTEC Products Catalog Ver.11 Part D&E - Silicon Disk & Options - CONTEC
P. 03
CONTEC Products Catalog Ver.11 Part D&E - Silicon Disk & Options - CONTEC
P. 04
Pages:
CONTEC Products Catalog Ver.11 Part D&E - Silicon Disk & Options - CONTEC


See other catalogues for CONTEC

Text version of the page
Industrial PC Products
Silicon Disk Drive
D S
Suitable for any application
IDE/SCSI harddisk compatible Silicon Drive
Box-PCs
Panel-PCs
Flat Panel Displays
Silicon Disk Drive
Option
• Fully Compatible With Standard IDE
These silicon disk drives are interchangeable with 2.5 inch and 3.5 inch IDE hard disk drives.
• Low power consumption
These drives have a maximum power consumption of 500mW.
• Noiseless
Without the motor noise of a standard hard disk drive, these disks are exceptionally quiet.
• Extremely Rugged and Reliable
CONTEC's silicon disk drives provide exceptional robustness against environmental factors such as vibration, shock or signal interference. They are suitable for any application where high reliability is required.
Box PCs &Panel PCswith Windows CE
Single Board Computer
Chassis / Backplane
Analog I/O
Digital I/O
Counter & Motion Controller
Serial
Communication GPIB
Communication
PC-ESD series [IDE]
PC-ESD500
512 MB
2.5 inch
PC-ESD1000
1 GB
Form
PC-ESD2000
2 GB
Factor
PC-ESD4000
4 GB
PC-ESD8000
8 GB
Remote I/O
PC-ESD series 2.5 inch Form Factor
Expansion Unit / Bus Adapter
3.5-inch Bay-mount Adapter
PC-HDADP(PC)
•The adapter is used to a 2.5-inch type of Silicon Disk Drive or Hard Disk Drive on the 3.5-inch Bay.
Software
Accessories & Cables
Distributed Monitors Control Network: F&elT
Multi-Programmable Display
Wireless LAN
Remote
Monitoring Solution Service & Products
The silicon disk drive is optional.
■Specifications [IDE]
PC-ESD series (2.5-inch)
Bus specification
ATA (IDE-AT 44-pin)
ATA bus transfer rate
10Mbyte/sec (Read),9Mbyte/sec (Write)
Data reliability
Frequency of unrecoverable errors per bit: Less than 1 /1014 reads
ECC
48 bits/sector *'
Max. limit on number of overwrites
100,000 times per physical overwrites
Rated voltage
5VDC±5%
Power Consumption
Sleep: 4mW (Typ.), Read: 500mW (max) / Write: 500mW (max)
Temperature
Operating: 0~60°C; Storage: -20~80°C
Humidity (Operating)
10 to 90%RH (no condensation)
Vibration / Impact resistance (Operating)
15G(Max.)/1000G(Max.)
Dimensions (mm)
69.85(W) x 100(D) x 12.5(H)
Weight
Approx. 100g
D-0
*1: Even 1bit error or 2bit error can also be detected.
As shown on the side of product's images, RoHS compliant (^^) is a CONTEC original marking for RoHS-compliant
Global Portal : www.contec.com

pageCatalog pdf di En 2012-05-22-28