Catalogue CONTEC Products Catalog Ver.11 Part A - BOX Computers
www.contec.com
print switch display
Page / 22
Make a request   
CONTEC - 15578, 157482, 208137, 5040, 3418, 4969, 5793, 81573, 14098
/ 22
See other catalogues for CONTEC
Text version of the page
Industrial PC Products
Specifications
■Common Specifications
Operating temperature 0~55°C
Storage temperature -25~75°C
Operating humidity 5~95%RH (no condensation)
Storage humidity 5~95%RH (no condensation)
Vibration Resistance JIS B 3502, IEC61131-2 compliant
Specification
CPU
Ultra Low Voltage Intel Cerelon M Processor
600MHz (FSB400MHz)
Chipset
Intel 852GM
L1 Cache
32KB *2
Memory L2 Cache
Main Memory
512KB
512MB
Silicon Disk Drives
Intermittent vibration
Frequency
Acceleration
Swing
5*f<9Hz
3.5mm
9Sf<150Hz
9.8m/s2
Continuous vibration
Frequency
Acceleration
Swing
5*f<9Hz
1.75mm
9*f<150Hz
4.9m/s2
Option
Controller Video RAM
built in 852GM
Main memory shared (max. 64MB)
Box PCs &Panel PCswith Windows CE
CRT I/F Specification
Analog RGB 15-pin HD-SUB connector
VGA
(640x480)
SVGA (800x600)
XGA
(1024x768)
SXGA
(1280x1024)
Horizontal
synchronous frequency
31.5KHz
37.9KHz
48.4KHz
64.1KHz
Vertical
synchronous frequency
60Hz
60Hz
60Hz
60 Hz
Number of color
s16,777,215
16r777r215
16r777r215
16r777r215
video
10 times, 80min each in x, y, z directions
JIS B 3502, IEC61131-2 compliant (147m/s, 3 times each in 2, 3 directions)
None Corrosive Gases
Below 2000m *3
In the Control Panel
Impact Resistance Operating Atmosphere Operating Altitude Place
Chassis / Backplane
IDE
Primary
40-pin half connector (can connect to 2 devices in maximum) *1
Secondary
Not support
Serial
RS-232C Compliant: 2ch (9-pin D-SUB connector and EX.I/F)
Transfer rate: 50 - 115,200bps
Parallel
Ich (in the EX I/F), Supported Mode:
Normal, SPP, EPP 1.7/1.9, ECP
LAN
I/F
Ethernet 10BASE-T / 100BASE-TX RJ^5connector
Controller
82551QM [Intel]
Controller
R5C485 [RICOH]
PC
Card Type
PCMCIA, CardBus
Card
Card Slot
Type I, II *1
Display *2
Card recognized LED (green)
CF Card slot *3
1* CF CARD Type I, II (dedicated to memory card)
(Primary IDE); PrimaryMaster, PrimarySlave switch-able
Analog I/O
Overvoltage Category ** Level of pollution *2
BelowII Below2
Digital I/O
*1: It refers to which electric power part from public wiring nets to local machinery that this device is connecting. Catalog II is applied for a fixed devive, a power feeding device and so on.
*2: It is a guideline that implies the outbreak degree of the conductive material around the Operating environment. Level 2 of pollution means that only inconductive pollution happens.
*3: Do not use it when it is pressurized to more than a atmospheric pressure where altitude is about 0.
Serial
Communication GPIB
Communication
The spcifications of the unit an the product will accord to the lowest capability in the all devices when the unit is quipped with the peripheral equipments purchased from the markets.
Remote I/O
Expansion Unit / Bus Adapter
Software
USB2.0, 3ch: Transfer Rate 480Mbps; 1ch(in the EX I/F):
USB1.1, 2ch , Transfer Rate: 1.5M/12Mbps
6-pin mini-Din connector (shared by keyboard and mouse)
Both can be used at the same time with conversion cable KB-PSY02K3
2ch, Time-out: System SDT 10msec~10sec,
User WDT 10msec~10sec
Lithium backup battery life: 10 years or more (25°C when electrifying) Real time clock precision error: within *3 minutes per month RDY(green), B.RUN(green), ERR(red), USER(red), BAT(orange), EXIT(green), ACCESS(green) Reset PUSH switch, DIP switch 6 polars, 3 position toggle switch Windows XP Professinal, Windows XP Embedded, Windows 2000 Professional 2 slot
55.2(W) x 115.0(D) x 98.0(H) (Exclusive of protrusions) +5VDC 3.0A *4
According to power supply unit 440g
USB I/F
Keyboard / PS/2 Mouse WDT
RTC/CMOS
LED
Operation Supported OS
Base unit using slot Dimensions (mm) Power Consumption (Max.) Instantaneous Blackout Weight
Accessories &
Cables
Distributed Monitors Control Network: FSeIT
Multi-Programmable
Display
Wireless LAN Remote
Monitoring Solution Service S Products
A-20
*1: A total of two units can be connected at the same time.
*2: LED will lights up when system recognizes PC card, and keep lighting until system find out card has beed unmounted
*3: A special CF card, which is different from a usual commercial product, is required when booting up Windows from a CF card.
Make sure to select a CF card with a capacity sufficient to install Windows successfully. *4: The power consumption of the peripheral devices (such as the PC card, USB device, keyboard, mouse, etc) and
the connector terminal is not included.
IPC-BX800
lOptions
Item
Product
Model Name
Note
IPC-BX720
Hard Disk Unit
PC CPU Dedicated Hard Disk Unit
PPC-HDD(MS)A
IPC-BX360
1GB CF Card (Fixed Disk mode)
CF-1GB-R
CF Card
2GB CF Card (Fixed Disk mode)
CF-2GB-R
^^^^^^^^^1 IPC-BX 700
4GB CF Card (Fixed Disk mode)
CF-4GB-R
8GB CF Card (Fixed Disk mode)
CF-8GB-R
IPC-BX 620
DVD/CD-ROM
DVD/CD-ROM Drive (included Cable: 400mm) *1
PPC-CDD-02
Connection Cable
DVD/CD-ROM Connection Cable for PPC CPU852(MS) (included Cable: 400mm) *2
PPC-CDC-01
^^^^^^^^^H IPC-BX 630
Connector Terminal
Connector Terminal for PC CPU
PPC-COT-01
DIN rail adapter for Connector Terminal
PPC-DINAD-01
Serial Conversion Cable
PC CPU Dedicated Serial Conversion Cable
PPC-SCC-01
Serial Cable
Anti-vibration Fixing Bracket
Anti-vibration Fixing Bracket for HDD
PPC-HBR-01
Manual Set
Manual Set in Japanese
PPC-CPU852(MS)-MJ
Manual Set in English
PPC-CPU852(MS)-MU
*1: Can not use the attached cable when installing OS in the CF card that connects PC CPU. Please purchase the dedicated cable (PPC-CDC-01). *2: It needs another cable when installing OS in the CF card that connects PC CPU and IPC-CDD-02.
I Difference between PPC-CPU852(MC)-512 and the conventional product [PPC-CPU686(MS)-128]
PPC-CPU686(MS)-128 (conventional product)
PPC-CPU852(MC)-512
CPU
Low Voltage Intel Cerelon Processor 400MHz (FSB 100MHz)
Ultra Low Voltage Intel Cerelon M Processor 600MHz (FSB 400MHz)
Chipset
Intel 440BX
Intel 852GM
Main Memory
128MB
512MB
PC Card
CardBus-compliant Type I, II *2 or Type III ^1 (ATA card bootable)
CardBus-compliant Type I, II *1
CF Card Slot
-
CF CARD Type I, II *1 (bootable)
USB
USB1.1 *2
USB2.0 *3
FDD I/F
FDD I/F *1
-
Supported OS
Windows 2000 Professional, Windows NT Workstation 4.0, Windows NT Embedded 4.0
Windows XP Professinal, Windows XP Embedded, Windows 2000 Professional
RoHS compliant
-
RoHS compliant
Global Portal : www.contec.com
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
Contents table
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15
page 16 p.16
page 17 p.17
page 18 p.18
page 19 p.19
page 20 p.20
page 21 p.21
page 22 p.22
pdf-page pdf di En 2008-10-41-12