Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Industrial PC Products | | | | | | | | | | ■ Specifications | | | | | | | | | | | | | | | | | | | | | | | | | Model | IPC-BX720-AC se | ries | IPC-BX/M360(PCI)C | | | | CPU | Intel® Cerelon® Processor 2.0GHz (FSB400MHz) | Ultra Low Voltage Intel® Cerelon® Processor 400MHz (FSB100MHz) | | | | Chipset | Intel® 845GV | VIA CLE266 (VT8623+VT8235) | | | | Main Memory | 512MB standard *1 / Max. 2GB (1GB «2), 2« 2.5V 184-pin DDR SDRAM PC2100 DIMM Socket | 512MB *2, 1« 3.3V 200-pin DDR SO-DIMM PC2100 Socket | | | | PC Card slot | - | 1« PCMCIA Type I or II (boot from ATA card is not supported), CardBus -compliant | | | | CF Card slot | 1« CF Card Type I, II (dedicated to memory card)[Secondary-IDE Slave] | 1« CF Card Type I, II (dedicated to memory card, Secondary-IDE), bootable | | | | Ethernet | LAN1: 100BASE-TX/10BASE-T LAN2: 1000BASE-T/100BASE-TX/10BASE-T | 2« 100BASE-TX/10BASE-T [Realtek RT8139DL] | | | | | | | | | | | | | | | | | | | Silicon Disk Drives | | | | | | | | | | Option | | | | | | | | | | Box PCs &Panel PCswith Windows CE | | | | | | | | | | Chassis / Backplane | | | | | | | | | | | | | | Analog I/O | | | | | | | | | | | | | | | | | | | | Expansion Bus slot | 2« PCI slot (PCI Rev2.0 -compliant) - | | | | System Resolution | 640«480(16,770,000 colors), 800«600(16,770,000 colors), 1, 024«768(16, 770, 000 colors), 1, 280«1, 024(16, 770, 000 colors) 1,600«1,200(16,770,000 colors) | 640x480(16,770,000 colors), 800x600(16,770,000 colors), 1, 024x768(16, 770, 000 colors), 1, 280x1, 024(16, 770, 000 colors) | | | | CRT I/F | | DVI-I 29pin *6 DVI-I 29pin *6 | | | | LCD I/F | *6 | - | | | | Keyboard I/F | Corresponding to PS/2 keyboard (6pin mini-DIN connector) Single PS/2 connector for both keyboard and mouse | | | | Mouse I/F | Corresponding to PS/2 mouse (6pin mini-DIN connector) | ( 2 in 1Y-cabele included) | | | | FDD I/F - | | | | IDE I/F | Primary: Ultra DMA/100, One 2,5-Inch IDE HDD or silicon disk drive mounted [Primary IDE Master];Secondary: Equipped with a dedicated 36pin, half-pitch connector (for connection of an optional CD-ROM/DVD-ROM drive) [Secondary IDE Master] *1« | Primary: Ultra DMA/133, 2.5-inch IDE HDD or silicon disk drive;Secondary: dedicated, external, 36-pin half pitch connector (for connection of optional CD-ROM) (Side in the left) *16 | | | | Serial I/F | | RS-232C(general-purpose): 4ch (SERIAL PORTI, 2, RS-232C (general-purpose): 2ch (SERIAL 3, 4) 9 pin D-SUB connector;RS-232C(touch panel): PORT1,2) 9-pin D-SUB connector; RS-232C 1ch (SERIAL PORT5) [inside the DVI connector] *7; (Touch Panel): 1ch (SERIAL PORT2) [inside RS422/485(general-purpose): 1ch (SERIAL PORT6) the DVI connector] *8;RS^22/485 (general-[inside the RAS connector], Baud rate: SERIAL1, 2 is purpose): 1 ch (SERIAL PORT1) [inside the 115,200bps, SERIAL3-6 is230,400bps | RAS connector] *7*9 | | | | Parallel I/F | - | | | | USB I/F | | 4ch (USB 2.0 specification) | | | | General-purpose I/O | 3 opto-isolated inputs and outputs(However, one output also serves as an external WDT output and one input also serves as remote reset. They become available when switched.) | | | | Audio | | AC97 compliant, Line In, Line Out, MIC: mini jack| AC97 compliant, Line Out:$ 3.5 Stereo mini jack, Full-scale output level 1.0Vrns(typ) | | | | RAS function | WDT: 1sec to 255sec (RESET or external output is according to Time Expiration), Remote reset: External input signal | | | | RTC/CMOS | Lithium backup battery life: 10 years or more | | | | Supported OS | Windows XP Professional, Windows XP Embedded | Windows 2000 Professional, Windows XP Professional, Windows XP Embedded | | | | Power Supply / Instantaneous Blackout | 85 - 132VAC/170 - 264VAC(47 - 63Hz) input automatic operation switch / Less than 20ms +10~12VDC (< ±5%) | | | | CurrentConsumption (Max.) | 190VA | 12V 2.5A, at shutdown*11: 12V 0.27A (Max.) | | | | Power Outage | 2.0kVAC20mA/1min | - | | | | Dielectric Strength | 50MH (500VDC) | - | | | | Operating Temp. / Storage Temp. / Humidity | 0~50°C<SDD in use>, 5~45°C<HDD in use> 0~45°C<SDD in use>, 5~40°C<HDD in use> / -10~60°C / 10~90%RH (no condensation) | / -10~60°C / 10~90%RH (no condensation) | | | | Floating Dust Particles / Corrosive Gases | Normal / None | | | | Noise resistance | Atmospheric discharge Line-noise | Contact discharge / ±4kV (IEC610004-2Level2, EN61000-4-2Level2), Atmospheric Discharge/±8kV (IEC61000-4-2Level3, EN61000-4-2Level3) *13 | Contactdischarge/±4kV(IEC10004-2Level2,EN61000-4-2Level2), Atmospheric Discharge / ±8kV (IEC1000^-2Level3, EN610004-2Level3) | | | | AC line/±2kV, Signal line/±1kV (IEC61000-4-4Level 3, N61000-4^Level 3) | - | | | | Vibration Resistanc | | Sweep Resistance | 10 - 57Hz/semi-amplitude 0.15mm 57 -150Hz/2.0G,40 min. each in x, y, and z directions(JIS C0040-compliant, IEC68-2-6-compliant) *14*15 | HDD in use:10~50Hz / 0.5G, 25min each in x, y, z directions (JIS C0040, IEC68-2-6 compliant) *14; HDD not in use:10~57Hz / semi-amplitude 0.15mm, 57~150Hz/ 2.0G, 40min each in x, y, and z directions S C0040, IEC68-2-6 compliant) *15 | | | | Impact Resistance *12*15*16 | 10G, half-sine shock for 11 milliseconds in x, y, 10G, half-sine shock for 11milliseconds in x, y, and z directions(JIS C0041 -compliant, and z directions (JIS C0041 -compliant, IEC68-2-27 -compliant)*13 | IEC68-2-27 -compliant) | | | | Grounding | Class D grounding (previous class 3 grounding) | | | | Dimensions (mm) | 242(W)*262(D)*115(H) 146(W)*157(D)*64(H) | | | | Weight | Approx. 5.6kg (without Memory Storage) | Approx. 1.5kg (without Memory Storage) | | | | Note: | | *1:512 memory is preinstalled in 1 socket. *9: The RS-232C port a *2:512 memory is preinstalled in 1 socket. Additional memory is not supported. simultaneously. (fac *3:256 memory is preinstalled in 1 socket *10: Serial ports 3 and 4 *4: ISA expansion slot does not support -5V, IOCHK, REFRESH and MSTER signals. byreplacing the brac (PCI bus slot: 32 bit spec.) functions (WDT time *5: Not supported under Windows NT Workstation 4.0 or Windows NT Embedded 4.0 general-purpose inp | | | | | | | | | | | | | | | | Digital I/O | | | | | | | | | | Serial Communication GPIB Communication Remote I/O | | | | | | | | | | Expansion Unit / Bus Adapter Software | | | | | | | | | | Accessories & Cables | | | | | | | | | | Distributed Monitora Control Network: F&eIT Multi-Programmable Display | | | | | | | | | | Wireless LAN | | | | | | | | | | Remote Monitoring Solution | | | | | | | | | | Service & Products | | | | | | | | | | A-14 | | | | | | | | | | IPC-BX 800 | | | | | | | | | | IPC-BX 720 | | | | | | | | | | IPC-BX 360 | | | | | | | | | | IPC-BX 700 | | | | | | | | | | IPC-BX 620 | | | | | | | | | | IPC-BX 630 | | | | | | | | | | *6:The unit be connected to CONTEC panel link input type display (using an optional cable) or to a normal analog RGB input display (using the attached DVI-analogue RGB conversion adapter). *7:The interface can be used with a CONTEC panel link specification compliant touchscreen displays. *8: COM 1 cannot be set to both RS-232C and RS-422/485 simultaneously (factory setting is RS-232C) | | When in ATX mode "12: When FDD is not used. (Exclusive of IPC-BX/M630(PCI)C) *13: CPU heat sink and the duct opening are excluded. *14: When the HDD is not in use. *15: Compatibility has been checked under applicable test conditions. However, we do not warrant normal operation under all conditions. Nor do not we warrant resistance to resonance due to the proximity of frequency. *16: Hard disk, silicon disk cannot be added. | | | | | | | | | | | | | | Global Portal : www.contec.com | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|