ACTUATORS AND CONTROLS - Conbraco Industries - #29

Text version of the page

CS & CL Continuous Duty Data CS & CL Extended Duty Data 29 TECHNICAL DATA—115VAC AND 230VAC Models* Torque Speed Duty VA Max Running Max Effective Peak Output (seconds Cycle Rating Current at Full Inrush Current (breakaway) per 90°) Load (True RMS) (=.66 x peak inrush) rotation) 115VAC 230VAC 115VAC 230VAC 115VAC 230VAC 150 in lb 8 75% 70vA 115vA .6 amps .5 amps 1.25 amps .924 amps 300 in lb 15 75% 70vA 115vA .6 amps .5 amps 1.25 amps .924 amps 600 in lb 30 75% 70vA 115vA .6 amps .5 amps 1.25 amps .924 amps 1000 in lb 25 75% 92vA 161vA .8 amps .7 amps 1.66 amps 1.29 amps 1500 in lb 40 75% 92vA 161vA .8 amps .7 amps 1.66 amps 1.29 amps 2000 in lb 55 75% 92vA 161vA .8 amps .7 amps 1.66 amps 1.29 amps 2500 in lb 70 75% 92vA 161vA .8 amps .7 amps 1.66 amps 1.29 amps 3000 in lb 75 55% 92vA 161vA .8 amps .7 amps 1.66 amps 1.29 amps ACTUATOR MODEL#’s/DESCRIPTION 230 VAC . . . . . . . . . . . . . . . . . . . 230 VAC MOTOR 24 VAC . . . . . . . . . . . . . . . . . . . . 24 VAC MOTOR (1) (Continuous Duty only) 12/24 VDC . . . . . . . . . . . . . . . . . 12 OR 24 VDC MOTOR (Continuous Duty only) X. . . . . . . . . . . . . . . . . . . . . . . . . NEMA 4,4X,7, & 9 W . . . . . . . . . . . . . . . . . . . . . . . . NEMA 4 & 4X H. . . . . . . . . . . . . . . . . . . . . . . . . TROPICAL HEATER S2. . . . . . . . . . . . . . . . . . . . . . . . TWO AUXILIARY SWITCHES SPDT T . . . . . . . . . . . . . . . . . . . . . . . . . HEATER AND THERMOSTAT K. . . . . . . . . . . . . . . . . . . . . . . . . MOTOR BRAKE(2) Z . . . . . . . . . . . . . . . . . . . . . . . . . DECLUTCHABLE HANDWHEEL OVERRIDE (1) NOT AVAILABLE WITH CSA LISTING. CONTACT FACTORY FOR CSA LISTING ON OPTION COMBINATIONS (2) NOT REQUIRED ON CONTINUOUS DUTY CYCLE UNITS CONTROL OPTIONS FOR CONTINUOUS DUTY CYCLE* R2. . . . . . . . . SINGLE RELAY 2 WIRE CONTROL C. . . . . . . . . . POSITIONER (SPECIFY SIGNAL)** CL2. . . . . . . . POSITIONER WITH FAIL SAFE BACKUP FOR CS SERIES(1) CL3. . . . . . . . POSITIONER WITH FAIL SAFE BACKUP FOR CL SERIES(1) L2. . . . . . . . . FAIL SAFE BATTERY BACKUP FOR CS SERIES***(1) L3. . . . . . . . . FAIL SAFE BATTERY BACKUP FOR CL SERIES***(1) J . . . . . . . . . . SPEED CONTROL/TIMER BOARD/3 WIRE RELAY (Extended Duty only) NOTE: NO MANUAL OVERRIDE ON FAILSAFE UNITS *CONTACT ACTUATOR ENGINEERING FOR APPLICATIONS NOT COVERED BY INDICATED OPTIONS *OPTION AVAILABILITY AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE **OPTION “C” INCLUDES POSITION TRANSMITTER & CYCLE RATE REGULATOR ***OPTION “CL2”,”CL3”,”L2”, &”L3” INCLUDE POSITION TRANSMITTER A BOARD OPTION MUST BE SELECTED WITH CONTINUOUS DUTY CYCLE. ONLY ONE BOARD OPTION CAN BE INSTALLED IN THE ACTUATOR. *Notes: 1. The Current Draws stated above include all options. If the brake and/or heater & thermostat are not installed, the actual current draws will be less. 2. For Extended Duty Cycle Models, Current Draws are provided at full running torque. If the actuator encounters an overtorque condition, such as a stall condition, the Current Draw will be vastly increased. 3. “Continuous Duty actuators contain brushless DC motors and are therefore not limited by duty cycle restraints in environments at or below 104°F; in ambient environments above this temperature the duty cycle is de-rated to 80%.” How To Order Examples ACTUATOR MODEL TORQUE ENCLOSURE OPTIONS VOLTAGE CS XXX 600 W-NEMA IV C (POSITIONER) 115VAC CL XXX 2500 W-NEMA IV S2 (TWO SWITCHES) 230 VAC CS & CL Specifications and Options Actuators and Controls 12VDC 24VDC 24VAC 115VAC 230VAC Torque Duty Cycle Time Current Draw Cycle Time Current Draw Cycle Time Current Draw Cycle Time Current Draw Cycle Time Current Draw (in-lbs) Cycle (sec/90°) Amps (sec/90°) Amps (sec/90°) Amps (sec/90°) Amps (sec/90°) Amps 150 100% 11 2.2 13 1.2 8 1.8 9 0.4 9 0.4 300 100% 17 2.5 13 1.4 12 2.1 13 0.5 13 0.4 600 100% 17 2.8 13 1.7 13 2.5 14 0.6 14 0.5 1000 100% 21 4 14 2.4 15 3.5 15 0.9 15 0.6 1500 100% 40 4 24 2.4 27 3.5 29 0.9 29 0.6 2000 100% 40 4.3 33 2.4 28 3.5 29 0.9 29 0.6 2500 100% 55 3.3 40 2 38 3.1 39 0.8 39 0.6 3000 100% 60 3.7 42 2.2 40 3.5 42 0.8 43 0.6