See other catalogues for
Conax Technologies
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | / / | | / | | |
| | | |
| | | Example: 1.50-260WELDIN - U7.5Q-S316 ,T= 3.50" | | |
| | | |
| | | u | | |
| | | .50 | | |
| | | |
| | | Insertion Length Insertion Length Designator in Inches (2.50" min.) | | Additional Information | | |
| | | Pipe Size L1.50 = 1-1/2" | | Bore Diameter 260 - for 0.250" diameter probes 385 - for 0.375" diameter probes | | Well Type WELDIN - Weld In | | | Material of Construction | | |
| | | |
| | | |
| | | S304 - Stainless Steel S316 - 316 Stainless Steel F11 - Chrome Molybdenum Steel F22 - Chrome Molybdenum Steel F91 - Chrome Molybdenum Steel CS - Carbon Steel | | |
| | | |
| | | |
| | | |
| | | Note: Specific material grade specifications may be added to callout, e.g. S316(A182). Other materials (titanium, Hastelloy, Monel, S316L, etc.) are available. Consult factory for details. | | |
| | | Ordering Information | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | Thread Size | Type Number | Elem. Length A | Insert Length U | Bore Diameter B | | | | | | U 2-1/2 | 4 | 2-1/2 | | | | | | | U 4-1/2 | 6 | 4-1/2 | | | | | | | U 7-1/2 | 9 | 7-1/2 | | | | | 1-1/2 | 260 WELDIN | U 10-1/2 | 12 | 10-1/2 | 0.260 | | | | | | U 13-1/2 | 15 | 13-1/2 | | | | | | | U 16-1/2 | 18 | 16-1/2 | | | | | | | U 22-1/2 | 24 | 22-1/2 | | | | | | | U 2-1/2 | 4 | 2-1/2 | | | | | | | U 4-1/2 | 6 | 4-1/2 | | | | | | | U 7-1/2 | 9 | 7-1/2 | | | | | 1-1/2 | 385 WELDIN | U 10-1/2 | 12 | 10-1/2 | 0.385 | | | | | | U 13-1/2 | 15 | 13-1/2 | | | | | | | U 16-1/2 | 18 | 16-1/2 | | | | | | | U 22-1/2 | 24 | 22-1/2 | | | | | | | | | | | | | | |
| | | 260 WELD-IN 1/2 NPT \ | | |
| | | |
| | | |
| | | Plug & Chain (optional) | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | Well Type | Material | MAXIMUM FLUID VELOCITY - feet per second* Insertion Length - U 2-1/2 4-1/2 7-1/2 10-1/2 13-1/2 16-1/2 19-1/2 22-1/2 | PRESSURE - TEMPERATURE RATING Temperature - T 70" 200" 400" 600" 800" 1000" 1200" | | | | 1-1/2-260 WELDIN | Carbon Steel | 493 (306) | 220 (170) | 79.4 | 40.5 | 24.5 | 16.4 | 11.7 | 8.8 | 5950 | 5750 | 5450 | 5250 | 4000 | 1750 | - | | | | A.I.S.I. 304 | 539 (443) | 233.5 (231) | 84.0 | 42.8 | 25.9 | 17.3 | 12.4 | 9.3 | 7800 | 7050 | 6400 | 6150 | 6000 | 5190 | 1875 | | | | A.I.S.I. 316 | 539 (443) | 233.5 (231) | 84.0 | 42.8 | 25.9 | 17.3 | 12.4 | 9.3 | 7800 | 7800 | 7250 | 7100 | 6950 | 5800 | 2720 | | | | F-11 | 549 (451) | 237 (235) | 85.5 | 43.0 | 26.4 | 17.6 | 12.6 | 9.5 | 7350 | 7350 | 7350 | 7350 | 7350 | 2898 | 504 | | | | F-22 | 549 (451) | 237 (235) | 85.5 | 43.0 | 26.4 | 17.6 | 12.6 | 9.5 | 7224 | 7224 | 7224 | 7224 | 7098 | 3192 | 546 | | | | 1-1/2-385 WELDIN | Carbon Steel | 451 (286) | 269 (159) | 96.9 | 49.0 | 29.9 | 20.0 | 14.0 | 10.7 | 5200 | 5000 | 4800 | 4600 | 3500 | 1500 | - | | | | A.I.S.I. 304 | 531 (385) | 285 (220) | 102 | 52.0 | 31.6 | 21.2 | 15.0 | 11.4 | 7000 | 6200 | 5600 | 5400 | 5200 | 4500 | 1650 | | | | A.I.S.I. 316 | 531 (385) | 285 (220) | 102 | 52.0 | 31.6 | 21.2 | 15.0 | 11.4 | 7000 | 7000 | 6400 | 6200 | 6100 | 5100 | 2500 | | | | F-11 | 542 (392) | 290 (224) | 104 | 53.2 | 32.0 | 21.5 | 15.4 | 11.6 | 6562 | 6562 | 6562 | 6562 | 6562 | 2587 | 450 | | | | F-22 | 542 (392) | 290 (224) | 104 | 53.2 | 32.0 | 21.5 | 15.4 | 11.6 | 6450 | 6450 | 6450 | 6450 | 6337 | 2850 | 487 | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | * Maximum velocity rating is based on operating temperatures of 1000° F for wells made of carbon steel, 304SST and 316SST; 350° F for wells made of brass; and 900° F for wells made of Monel. Slightly higher velocity is possible at lower temperatures. In these tables, single numbers represent the safe values for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. In these cases, the values in parentheses represent safe values for water flow, and the unbracketed values may be used for steam, air, gas and similar density fluids. | | |
| | | |
| | | | | |
| | | |
| | | 9 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
