8 pages in the catalogue
Field Installation of Temperature Sensor Assemblies - Bulletin 6027 |
 |
Field Installation of Temperature Sensor Assemblies - Bulletin 6027 p 1 Field Installation of Thermocouple & RTD Temperature Sensor Assemblies Although temperature sensor buyers usually pay close attention to choosing the right device for the job, they are often less dili... |
 |
Field Installation of Temperature Sensor Assemblies - Bulletin 6027 p 2 Thermowells may also be provided with a 1/2 or 3/4 in. straight thread, whose engagement will be greater by approximately 1/4 in. than the values provided for NPT threads. You should keep this additio... |
 |
Field Installation of Temperature Sensor Assemblies - Bulletin 6027 p 3 Figure 2. Packing glands are used to seal temperature probes, cables, or tubes, preventing leakage of gas or liquids and preserving vacuum or pressurized atmospheres within a vessel. The elastomeric m... |
 |
Field Installation of Temperature Sensor Assemblies - Bulletin 6027 p 4 Installing the Sensor Assembly Now that you are sure you have the correct parts, have checked the sizing, and have removed any potential dangers from pressure or electric power, you are ready to begin... |
 |
Field Installation of Temperature Sensor Assemblies - Bulletin 6027 p 5 Attaching to the Terminal Junction Attach the thermocouple wire to the terminal block by matching the wire polarity and/or color to the corresponding terminal (e.g. red wire to red wire). Use the Ther... |
