ASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONSASSEMBLYINSTRUCTIONS 5001
5001C TABLE OF CONTENTS
C
Introduction to Conax Technologies
ฎ 4-5 Introduction to Conax Compression Seal FittingsSelection Guide to Compression Seal FittingsSingle Element Sealing 6-13 14-17
Use these products when you need to seal a single element such as a temperature probe, tubewell, pipe, etc. These products are capable of sealing on items made of materials such as metal, glass, ceramic or plastic. Packing Gland (PG) Series
For sealing on anything from fragile tubes and soft cables to solid probes or instruments
Element diameters range from 0.040" (1.0mm) to 1.50" (47.5mm) pipe 18-25 Midlock ( MK ) Series
Best used for sealing on metal elements and/or high vibration environments
Stainless steel throughout single ferrule is self-aligning 26-27 Electrode ( EG ) Series
Fully isolating for electrical power or instrument isolation to 2000V
High pressure, high temperature and current capabilities 28-31 Electrode Teflon ( EGT ) Series
Fully isolating for bare electrical power leads or instrumentation isolation to 8000V
Teflon insulation and sealant material for high performance and chemical resistance 32-35 Split ( PGS ) Series
Seals cables and leads when larger probes or connectors are attached
See Split (PGS/SPG/DSPG) Series in Multiple Element Sealing section pages 64-67 64-67 Multiple Element Sealing With Factory Installed Leadwires
Use these products when multiple wire feedthroughs are required to carry power or instrumentation signals into
pressure or vacuum environments. These compression seal fittings are manufactured with factory installed leadwires. High Density ( HD ) Feedthrough Series
A compact and reliable wire sealing design - does not use epoxy or potting
Seals from 12 to 60 wires per unit, 24 AWG, Teflon insulated 36-37 High Pressure ( HPPL / HPEG ) Series
For sealing on power leads or instrument leads in high pressure environments
For applications with pressures to 30,000 psi (2,070 bar) 38-39 Power Lead ( PL ) Series
For high performance sealing from 1 to 18 larger gage wires sizes 8 to 20 AWG
Rated 600Vac/850VDC @ 55A max available with or without conductors 40-45 Transducer Gland Teflon ( TG24T ) Series
Utilizes 24 AWG Teflon insulated copper or thermocouple leads rated at 100VDC
Seals up to 24 Teflon insulated, 24 AWG instrument leads per fitting to 8000 psi (551 bar) 46-47 Transducer Gland Fiberglass ( TGF / TGM ) Series
Utilizes fiberglass insulated thermocouple wire for applications > 450ฐF (232ฐC)
Seals up to 24 high temperature insulated 20/24 AWG wires per fitting 48-49
TECHNOLOGIES 2
Tel: 1.716.684.4500 USAToll Free: 1.800.223.2389 Email: info@conaxtechnologies.com Website: www.conaxtechnologies.com