| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Operating Temperatures Up to 4200 F (2315 C) | | |
| | | lltjll IGIII|IGICI | | |
| | | |
| | | | | |
| | | |
| | | Single Thermocouple Assembly Conax Buffalo Packing Glands provide pressure or vacuum sealing of thermocouples. The reusable stainless steel fitting with replaceable industrial sealant can be used In gas or liquid environments. Listed sealing gland torque values are determined for supplied thermocouple and support tube assemblies operating at 300 pslg maximum pressure and 68° F (20° C) temperature | | |
| | | |
| | | SPECIFICATIONS: | | |
| | | Tube or | | |
| | | |
| | | |
| | | Catalog | | Probe Thread Length | | Torque (in-lbs except as noted) | | |
| | | | | | | | | | | | | | | | Number | Diameter | NPT | "A" | Hex Size | | Lava | Grafoil® | | | | MPG-125-* | .125" | 1/8" | 1-3/16" | 1/2" | 35-40 | 70-75 | 55-60 | | | | MPG-187-* | .187" | 1/8" | 1-3/16" | 1/2" | 35-40 | 70-75 | 55-60 | | | | PG2-125-* | .125" | 1/4" | 2" | 3/4" | 95-100 | 250-260 | 210-220 | | | | PG2-187-* | .187" | 1/4" | 2" | 3/4" | 75-80 | 205-215 | 180-190 | | | | PG2-250-* | .250" | 1/4" | 2" | 3/4" | 55-60 | 160-170 | 150-160 | | | | PG4-250-* | .250" | 1/2" | 2-1/2" | 1" | 45-50 ft-lbs | 80-85 ft-lbs | 45-50 ft-lbs | | | | PG4-312-* | .312" | 1/2" | 2-1/2" | 1" | 45-50 ft-lbs | 80-85 ft-lbs | 45-50 ft-lbs | | | | PG4-375-* | .375" | 1/2" | 2-1/2" | 1" | 45-50 ft-lbs | 80-85 ft-lbs | 45-50 ft-lbs | | | | PG5-500-* | .500" | 3/4" | 2-7/8" | 1-1/2" | 55-60 ft-lbs | 200-220 ft-lbs | 90-100 ft-lbs | | | | | | | | | | | | | | | |
| | | - Packing Gland - Diameter of tube or probe in thousandths of an inch — Type A has mounting thread only r- Sealant Code L for Lava-up to 1600" F (870" C) V for Viton-up to 450" F (232" C) G for Grafoil-up to 925" F (495" C) | | |
| | | |
| | | |
| | | PG2-125-A-L | | |
| | | All pressure 3rd vacuum ratings are determined at68°F (20° C). Viton is a registered trademark otDow Elastomers L.LC. Gratoii is a registered trademark ot UCAR Carbon Company | | |
| | | |
| | | |
| | | urrà | | |
| | | ■ | | |
| | | | | |
| | | |
| | | |
| | | Glands & Electrode Gland Teflon (EGT) Glands Electrode Seals for Pressure/Vacuum Service Electrode Glands with ceramic Insulators or one-piece teflon Insulator sealant are available for use In vacuum furnaces, environmental chambers and other applications requiring the thermal and/or electrical isolation of electrodes, tubes or temperature sensors. The EG Series with ceramic insulators are rated for 2000 VDC voltage, EGT Series with Teflon insulator are rated for 8000 VDC voltage | |
| | | Power Lead (PL) Glands Wire Seals for Pressure/Vacuum Service Insulated power lead sealing glands provide versatility for sealing against gas or liquid In applications such as vacuum and gas back-filled industrial furnaces. PL Glands are designed to industrial seal pressures ranging from vacuum to 10,000 psl (690 bar) In temperatures ranging from -300° F to 450° F (-240° C to +232° C). Seals 1-12 wires, 18 to 8 gauge, 5 to 55 amps, 600-volt rated. | |
| | | |
| | | For further Information on any of these products, contact Conax Buffalo for a Product Bulletin or visit our website at www. conaxbuffalo.com/products. | | |
| | | |
| | | For more information call: 1-800-223-2389 • e-mail: conaxbuf@conaxbuffalo.com • visit our website: www.conaxbuffalo.com | | |
| | | |
| | | 14 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |