BANDED BELTS VECOBAND

FICHE TECHNIQUE
10007 - 2/2 - 11/97 General characteristics
TECHNICAL DATA SHEET
General Specifications
• working with
pulleys following the standards :- 3 VJ and 5 VJ sections following the standard ISO 5290
- AJ and BJ sections following the standard NF ISO 5291
- SPCJ sections following the standard ISO 4183 (standard
pulleys) ? usefull temperature : - 20° to + 80°C? antistatic following the standard NF T 47 104
? V. belt sections following the standard E 24 - 213
? resistant to oil projection, hydrocarbure and dilute acids. Approved by API (American Institut of Petroleum)
? endure centrifugal strength
? good draining of heat at high speed
Marking
Banded Belts VECOBAND - 11968 COLMANT CUVELIER VECOBAND SPCJ X 4 3080
2 C
MADE INFRANCE On our DYNAM belts, you can read :- the trade mark : COLMANT CUVELIER VECOBAND
- the section : SPCJ (J for banded)
- the number of cords : X 4
- the effective length : 3080 mm
- the production date (code month and year) : 2 C
Stocking conditions
Stock turn : The best thing to do is : "first in, first out" Belts must be stocked under the following conditions :
? the room must be dry, without dust and well ventilated
? temperature must be between +5°C and +25°C
? no condensation, maximum humidity of air : 65 %
? avoid direct sun light and high artificial light due to ultraviolet
? avoid contact with chemical products, solvent, petrol, lubricant, acid, volatile components, greases
? no material which can produce ozone, like high tension electric material, electric motors or other materials which can produce sparks or electric discharge
? the stocked belts must not have been stressed, compressed, or deformed
? set them more than 1 meter from radiators or heat source
? avoid direct contact with some kinds of of metal (copper, manganese, ...)
? avoid contact with sharp, abrasive and angular surfaces
? the material of boxes, packings and the coverings must not containt noxives substances for the belts like copper, creosotes ... Cleaning : The cleaning with water and soap is the most harmless. You must never use organic solvents like trichlorethylene, tetrachlorure of carbone or ether of petrol, no abrassive, pointed or sharp tools. The cleaned belts must be dried at ambient temperature.
COLMANT CUVELIER S.A.
rue Greuze - B.P. 529 - 59022 LILLE CEDEX - FRANCE tél : (33) 3 20 67 79 01 - fax : (33) 3 20 67 79 79
