NeuVend Hose Data Sheet - Colex International Limited - #1

/ 1


catalogue search
NeuVend Hose Data Sheet - Colex International Limited
P. 01
Page:
NeuVend Hose Data Sheet - Colex International Limited


See other catalogues for Colex International Limited
You may also be interested in

Plastic pipe, Pipe, Polyurethane hose, Coolant hose, Water hose


Text version of the page
Colex International Limited
NeuVend Hose Data Sheet
NeuVend is a Polyester Reinforced Hose manufactured from a uniquely formulated Thermoplastic Elastomer lined with Polyethylene for a smooth internal surface.
This combination results in a Hose that has excellent flexural properties, is plasticizer free and has good chemical resistance.
It has been tested in accordance with BS6920 and has achieved WRAS approval for the conveyance of cold and hot potable water up to 85°C. (WRAS listing number 0804508)
Applications
Hot and cold water connections to free standing machines, chemical lines, and some liquid foodstuffs. Because this Hose is PVC free it is also suitable for a wide range of applications where end users are concerned about the possibility of Phthalate (Plasticizer) migration.
Chemical Resistance
The Hose has a very good chemical resistance and will convey many chemicals, and chemical solutions in water.
For more detailed information see our chemical resistance chart.
Colour
The standard hose has natural additive free liner, a black inner layer, which acts as an effective light barrier, and a white cover.
However, other colours can be made to customer requirements; all orders are subject to minimum order quantities.
Temperature *
Temperature range -20°Cto +85°C
1 1
Part Number
ID (mm)
OD (mm)
ID Tolerances (mm)
*
Burst Pressure
Kgs/m
*
Bend Radius (mm)
Colour
PSI
bar
NV6.3/11.5
6.3
11.5
+0.25/-0.25
1160
80
0.068
22
Natural Liner/Black Inner/White outer cover
NV10/16
10
16
+0.25/-0.25
925
64
0.112
37
Natural Liner/Black Inner/White outer cover
NV12.5/18.5
12.5
18.5
+0.26/-0.25
695
48
0.133
49
Natural Liner/Black Inner/White outer cover
NV19/26
19
26
+0.25/-0.25
525
36
0.225
84
Natural Liner/Black Inner/White outer cover
NV25/33
25
33
+0.25/-0.25
348
24
0.330
118
Natural Liner/Black Inner/White outer cover
Technical Details
The working pressures given in the table above are based on a 4:1 safety factor on the shortterm burst at 20°C. Any increase in the workingtemperature above 20°C will decrease the working pressure of the hose.
Also available in:
Different ID and OD sizes. Different Colours. A range of cut lengths and coil lengths. If there is a need for higher pressures, different yarn densities and configurations are available. ALL ORDERS ARE SUBJECT TO MINIMUM QUANTITIES
* For use as a guide only
Tel: + 44(0) 1858 461100 9 Fax: + 44(0) 1858 466 121 Ä Email: sales@colexint.co.uk H Web: www.colexint.com
IMPORTANT NOTE: Whilst every effort is made to ensure that the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore recommendations are made without warranty or guarantee. Colex reserve the right to change specifications without prior notice.

pageCatalog pdf di En 2012-05-19-12