Micro Spring™ Air Core Inductors - Coilcraft - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for Coilcraft

Low pass filter, Filter, Sensor, Choke, Power supply transformer

Text version of the page

Document 163-1

Micro Spring™ Air Core Inductors

• Small air core inductors feature high Q and tight tolerances

• Acrylic jacket provides a flat top for pick and place

• Solder coated leads ensure reliable soldering

Designer's Kit C308 contains 12 each of all values. Kit C308-2 contains12 each of all 2% values.

Terminations RoHS compliant tin-silver over copper Other

terminations available at additional cost.

Weight 0906: 10-12 mg; 1606: 18-27 mg

Ambient temperature -40°C to +125°C with I rms current, +125°C

to +140°C with derated current

Storage temperature Component: -40°C to +140°C.

Packaging: -55°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Mean Time Between Failures (MTBF) One billion hours

Packaging 0906: 500 per 7" reel Plastic tape: 8 mm wide, 0.3 mm

thick, 4 mm pocket spacing, 1.5 mm pocket depth

1606: 500 per 7" reel Plastic tape: 12 mm wide, 0.3 mm thick, 4 mm

pocket spacing, 1.6 mm pocket depth

PCB washing Only pure water or alcohol recommended

SRF DCR


Part		L²	Percent	Q⁴	min⁵	max⁶	Irms⁷
number¹	Turns	(nH)	tol³	min	(GHz) (mOhm)		(A)
0906-2KL_	2	1.65	10	100	10.0	4.0	1.6
0906-3JL_	3	2.55	5	100	8.2	5.0	1.6
0906-4_L_	4	3.85	5,2	100	7.5	6.0	1.6
0906-5 L	5	5.40	5,2	100	7.0	8.0	1.6
1606-6_L_	6	5.60	5,2	100	6.5	9.0	1.6
1606-7_L_	7	7.15	5,2	100	6.0	10	1.6
1606-8_L_	8	8.80	5,2	100	6.0	12	1.6
1606-9_L_	9	9.85	5,2	100	5.2	13	1.6
1606-10_L_	10	12.55	5,2	100	4.6	14	1.6

Encapsulant

Size A max B max C max

F max

0.060 1,52

0.020 0,51

0906

0.095 2,41

0.135 3,43

0.055 ±0.010 1,40 ±0,25

0.072 ±0.010

1,83 ±0,25

1. When ordering, specify tolerance, termination and packaging codes:

'-ill-'

1606-10GLC

Tolerance: G =2% J = 5% K = 10% (Table shows stock

tolerances in bold.) Termination: L =RoHS compliant tin-silver (96.5/3.5) over copper.

Special order: T = RoHS tin-silver-copper (95.5/4/0.5)

or S = non-RoHS tin-lead (63/37). Packaging: C =7" machine-ready reel. EIA-481 embossed plastic

tape, 500 parts per full reel. B = Less than full reel. In tape, but not machine-ready.

To have a leader and trailer added ($25 charge), use

code letter C instead.

2. Inductance measured using Agilent/HP 4286 with Coilcraft SMD-A fixture and correlation.

3. Tolerances in bold are stocked for immediate shipment.

4. Q measured at 800 MHz, using an Agilent/HP 4291A with an Agilent/ HP 16193A test fixture.

5. SRF measured using an Agilent/HP 8720D with a Coilcraft SMD-D fixture.

6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter.

7. Current that causes a 15°C temperature rise from 25°C ambient.

8. Electrical specifications at 25°C.

See Qualification Standards section for environmental and test data. Refer to Doc 362 "Soldering Surface Mount Components" before soldering.

0.165 4,19

0.135 3,43

0.062

1,58

0.055 ±0.010 1,40 ±0,25

0.144 ±0.012 3,66 ±0,30

0.020 0,51

1606

135°. max

Strip Length

0° min

Recommended Land Patterns

0906 Size

1606 Size

_J L 0.031

0.031

0,79

0.040~x 1,02 i

0.097 T ^2,46 \

0.040 1,02

0.097 2,46

_J I „ I 0.041

0.103 I "H 2,62 V

I 10.113 r*1 2,87

0.175

4,45

Dimensions are in

inches

Specifications subject to change without notice. Please check our website for latest information.

Document 163-1 Revised 07/08/08

1102 Silver Lake Road Cary, Illinois 60013 Phone 847/639-6400 Fax 847/639-1469

E-mail info@coilcraft.com Web http://www.coilcraft.com

Micro Spring™ Air Core Inductors - Coilcraft - #1

Low pass filter, Filter, Sensor, Choke, Power supply transformer