M2022 Series Common Mode EMI/RFI Filter - Coilcraft - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for Coilcraft

Transformer, Ferrite chip inductor, Connector, Filter coil, Chip inductor

Text version of the page

Document 151-1

Common Mode EMI Filters - M2022 Series

KÄS

These common mode filters provide excellent noise attenuation in a compact, surface mount package. They're built in an 1812 size configuration that's ideal for auto insertion. In addition to the standard filter, a low profile (-ALPL) and shielded (-ASL) version are available.

Features include excellent isolation, environmental stability and low cost. Coilcraft can also supply custom filters with special combinations of impedance, response and current handling.

M2022-AL, M2022-ALPL

Color dot over pin 1

40dB

Part number¹

Inductance²(uH)

DCR max (mOhm)

Irms³(mAmp)

Isolation (Vrms)

M2022-ASL

M2022-AL_

M2022-ALPL_

M2022-ASL_

4.2 ±10% 4.0 ±10% 11.5 min

800 990 850

500

500 500

500 500 500

1. When ordering, please specify packaging codes:

M2022-ALPLC

Packaging: C=7" machine-ready reel. EIA-481 embossed plastic

tape (600 parts per full reel). B=Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge),

use code letter C instead. D=13" machine-ready reel. EIA-481 embossed plastic

tape (2200 parts per full reel).

2. Inductance is per winding, measured at 10 MHz.

3. Current that causes a 30°C temperature rise from 25°C ambient.

4. Ambient temperature range: -40°C to +85°C with I rms current

5. Storage temperature range: Component: -55°C to +85°C

Packaging: -55°C to +80°C

6. Electrical specifications at 25°C.

Refer to Doc 362 "Soldering Surface Mount Components" before soldering.

M2022-AL


A max B max	C max	D ref	E ref	F ref	G min	H
0.195 0.150	0.135	0.070	0.100	0.178	0.04	0.03
4,95 3,81	3,43	1,78	2,54	4,52	1,02	0,76
M2022-ALPL
A max B max	C max	D ref	E ref	F ref	G min	H
0.195 0.150	0.079	0.070	0.100	0.178	0.04	0.03
4,95 3,81	2,01	1,78	2,54	4,52	1,02	0,76
M2022-ASL
A max B max	C max	D ref	E ref	F ref	G min	H
0.231 0.196	0.150	0.107	0.100	0.178	0.04	0.03
5,87 4,98	3,81	2,72	2,54	4,52	1,02	0,76

Recommended Land Pattern

I I ^0.057

0,38 \ H 1,45

ST -y

0.020 0.115

0,51 ~*1 r*" 2,92

Pad

Detail

0.020 0,51

Weight: M2022-AL 155 mg; M2022-ALPL 85.5 mg; M2022-ASL 319 mg

Terminations: Gold over nickel over moly-manganese.

Tape and reel: 600/7" reel; 2200/13" reel 12 mm tape width

For packaging data see Tape and Reel Specifications section.

⁰5°3^15re^ r*-*-| T 0.030 ±0.002

^, ⁰⁰⁴⁰ min 0,76 ±0,05

1,02

J L_0:°18 *l 0,46

0.048 1,22

Specifications subject to change without notice. Please check our website for latest information.

Document 151-1 Revised 10/02/06

1102 Silver Lake Road Cary, Illinois 60013 Phone 847/639-6400 Fax 847/639-1469

E-mail info@coilcraft.com Web http://www.coilcraft.com

M2022 Series Common Mode EMI/RFI Filter - Coilcraft - #1

Transformer, Ferrite chip inductor, Connector, Filter coil, Chip inductor