Optigo 200 Compact, Non-Contact 3d measurement System 1 COP with features Two COPs assembled Cloud of points (COP) Meshed COP 2 Single-point measurement Edge-point measurement Hole measurement 3 Surface analysis System Specifications Throughput* Accuracy Image Acquisition Overall image grabbing sequence Measurement and analysis Field of View (FOV) 140 x 180 x 60 mm 190 x 260 x 150 mm 290 x 380 x 200 mm Physical dimensions (H x W x D) Weight Camera Stand-off distance Features Supported file formats Input Electronic cabinet Data type Supported file formats Computer Optical Head Output Physical dimensions (H x W x D) Weight Miscellaneous Operating temperature Lighting conditions Vibration conditions Surfaces measured Maximal size of measured object Electrical requirements < 1 msec. < 0.5 sec. 10 sec. Local accuracy - average Local average + 2[ accuracy 35µm 15µm 45µm 20µm 70µm 25µm 300 x 320 x 200 mm 10 kg 3 high resolution 1.4 Mega pixels Industrial ccd cameras 75 cm Cloud of points ASCII xyz file, surface analysis, surface point measurement, edge point measurement, slots, rectangular and circular hole measurement, edges, and cross-sections STL, OpenInventor, PolyWorks PIF, Tebis DGT, DMIS and customized ASCII formats, Excel-ready tab separated file Geometry exchange format and feature measurement format IGES, VDA-FS, STEP, CATIA, STL, DMIS and customized ASCII formats Dual processor, Pentium IV, 1.8 GHz CPU, 1GB RAM, Microsoft Windows 2000. 15" LCD monitor. 840 x 710 x 600 mm 110 kg (245 lbs) 10 - 35°C (50 - 95°F) Most industrial lighting Suitable for production environment Painted/unpainted (no special treatment required for most surfaces) Almost unlimited 110/220 Volt, consumption max. 1.4 KVA Surface analysis 4 Cross-section analysis * Typical single tile surface measured. Specifications are subject to change without notice. Some of the above specifications are optional. 1. COP (Cloud of points) are generated by the Optigo system and can be exported to standard CAD and analysis software systems. 2. Single points and features Single points, holes, slots, and edge points are detected and accurately measured for analysis and deviation detection. 3. Surface analysis CAD/COP comparison to CAD or golden part generates a colorcoded mapping of a surface. 4. Cross-sections Definition of the acquired data can be generated at any orientation and spacing. 3D Vision Systems USA Tel: 1-248-344-2500 Fax: 1-248-344-7737 Germany Tel: 49-6033-9732-0 Fax: 49-6033-9732-29 Japan Tel: 81-3-5420-4057 Fax: 81-3-5420-4058 Headquarters Tel: 972-3-548-8222 Fax: 972-3-547-2224 E-mail: info@cognitens.com © CogniTens 3D Vision Systems Ltd. 06/02 www.cognitens.com