| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Specifications | | |
| | | |
| | | | | | | | | | LIGHTING AND OPTICS | | | | Illumination | | | | | Field of view @ 7.62cm (3in) distance from Checker* Field of view @ 30.48cm (12in) distance from Checker* | 3.56cm x 2.80cm (1.4in x 1.1in) 13.46cm x 10.41cm (5.3in x 4.1in) | | | | EXTERNAL TRIGGER INPUT | | | | Operating voltage | 24VDC | | | | Protection | Opto-isolated | | | | OUTPUTS | | | | Operating voltage | 24VDC | | | | Drive current (max) | 100mA | | | | Protection | Opto-isolated, protected against short circuits and reverse polarity | | | | ENCODER INPUT (101E only) | | | | Encoder type | 300 kHz (max) quadrature encoder. Open collector output. | | | | SETUP INTERFACE | | | | USB 1.1 (USB 2.0 compatible) | | | | POWER AND I/O WIRING | | | | Wire size | 24 AWG | | | | Length | 3.66m (12ft) | | | | | | | | | | | | | | | | | | POWER | CHECKER SENSORS | | | | Electrical requirements | 24VDC | Part Number | Description | | | | Current draw (max.) | 200mA @ 24VDC | CKR-101-00 | Checker 101 sensor | | | | MECHANICAL | CKR-101E-00 | Checker101E sensor | | | | Mounting | Three M4 threaded mounting holes on back of unit | Included Accessories | | | | | | • 5.8mm lens • CheckMate™ softwa e CD | | | | Weight | 240g (8.47oz) | • USB cable | | | | | | | | | | | | |
| | | |
| | | ENVIRONMENTAL Operating temperature Storage temperature Operating humidity Protection CERTIFICATIONS | | |
| | | > I/O wiring card > Mounting screws, Allen wrenches, and screwdriver (for adjusting focus) | | |
| | | 0°-50°C (32°-122°F) -30°-80°C (-22°-176°F) 0%-90% non-condensing IP67 | | |
| | | |
| | | |
| | | |
| | | FCC | | |
| | | |
| | | PC (only required for setup) Operating systems CPU RAM USB | | |
| | | Windows® 2000, XP 400MHz PIII 128MB 1.1 or later | | |
| | | |
| | | Screen resolution | | 1024 x 768 or higher | | |
| | | |
| | | |
| | | *Field of view range is for included lens (5.8mm). Other lenses are available. | | |
| | | |
| | | Termination | | Pigtailed | | |
| | | | |
| | | |
| | | _45.9mm_ (1.806in) | | |
| | | 53.2mm (2.094in) | | |
| | | |
| | | |
| | | For more information, please visit www.cognex.com/checker | | |
| | | n □ 0 z m X | | |
| | | |
| | | 129.2mm (5.087in) | | |
| | | |
| | | |
| | | 3 | | |
| | | |
| | | USB CONNECTOR | | |
| | | |
| | | COGNEX Vision for Industry® Corporate Headquarters: One Vision Drive, Natick, MA 01760-2059 (508) 650-3000 fax: (508) 650-3344 www.cognex.com Offices: Canada (905) 634-2726 • China +86 21 6407 5835 • France +33 1 4777 1550 • Germany +49 721 6639 0 • Ireland +353 1 825 4420 Italy +39 02 6747 1200 • Japan +81 3 5977 5400 • Korea +82 2 539 9047 • Netherlands +31 402 668 565 • Singapore +65 6325 5700 Sweden +46 21 14 55 88 • Switzerland +41 71 760 05 57 • Taiwan +886 3 578 0060 • United Kingdom +44 1908 206 000 © 2006 Cognex Corporation. All information in this document is subject to change without notice. Cognex and Cognex Vision for Industry are registered trademarks of, and Checker and CheckMate are trademarks of, Cognex Corporation. All other trademarks are the property of their respective owners. Protected by one or more U.S. patents listed at www.cognex.com, with other U.S. and foreign patents pending. All rights reserved. Printed in the USA. Lit No. MK6143-0306. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |