Text version of the page

ASSEMBLY AND MAINTENANCE INSTRUCTIONS MODEL AT WARM WATER GATES

Note: It is important to apply high resistance glue (similar to Loctite brand) on the contacts between the sealings. This will provide a strong adhesion between then and avoid leakages of water between them. Note: During the assembling of the new sealing joint it is recommended to apply “Vaseline” on the sealing area to make the assembling easier and to provide and smooth operation of the valve (do not use oil, neither grease). Following we are giving the details of the Vaseline used by CMO: VASELINE FILANTE Saybolt colour ASTM D-156 15 Fusion point (ºC) ASTM D-127 60 Viscosity at 100ºC ASTM D-445 5 Penetration 25ºC mm/10 ASTM D-937 165 Silicon Content No content Farmacopea BP OK C.M.O. Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN) Phone: 943-67.33.99 / Fax: 943.67.24.40 / cmo@cmo.es http://www.cmo.es -4-