Catalogue Data Sheet - Switch Valve
www.clydematerials.com
print switch display
Page / 2
Manufacturer's
contact details
Where to buy
this product ?
Request
a Quote
Clyde Materials Handling - 147843, 159083, 6097, 208208, 128305, 94227, 420260, 14302
/ 2
See other catalogues for Clyde Materials Handling
Text version of the page
Issued Aug 2007 Page 1 of 2
Data Sheet For:
Switch Valve
Options
Introduction
The operating efficiency of all Clyde Materials Handling units relies upon the unique and patented Clyde Dome Valve, currently installed in over 10,000 applications worldwide. Simple in design and low in maintenance, this high performance valve is used throughout a wide range of industries.
In action the Clyde Dome Valve is a pressure tight compressed air operated valve, capable of returning over one million maintenance-free cycles, even in abrasive, hazardous or toxic applications. The fast-closing cut-off valve incorporates a unique inflatable sealing mechanism. This provides the pressure tight industrial seal, against the dome surface when in the closed position.
Options
A range of standard and non-standard options are available for the Clyde Dome Valve which are detailed on the Clyde Dome Valve Data Sheet. Switch Valves suppliers can be converging or diverging. Three way versions are available also.
• Option 1 : Mounted vertically in the conveying line (preferred).
• Option 2 : Mounted horizontally in the conveying line (preferred).
• Option 3 : Mounted horizontally in the conveying line with the manufacturers of actuators above the conveying line (non-preferred).
Standard Fabrication
Dome Valve switch valve assemblies supplied complete with Clyde Isolation valves, mild steel. 'Y' branch, compressed air controls, air supply piping, strainer, filter and control panel ready for connection to isolated air and electric supplies.
• Air supply pressure : 6 < 7 barg.
• Design pressure : 7 bar.
• Maximum conveying pressure : 4.5 bar.
Mounting
The Clyde Dome Valve must always be mounted so that the dome is at the top, or as near the top, of the conveying pipe when the valve is open. The valve must be mounted only in the following positions:
www.originaldomevalve.com
This leaflet is for guidance only. It does not form part of any contract and is subject to change without notice.
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
pdf-page pdf di En 2009-11-48-27