Magneta Miniature Clutches - Flange Mounted - Clutch Parts - #1

High torque capacity

No running-in required

Maximum speed 1500 r/min

Bearing mounted coil for easy mounting

No residual torque when disengaged

Very long life

Bores 5 to 15mm

Select the assembly with type 1 armature for in-line shaft to shaft drives noting the required shaft alignment limit tw. Select armature type 3 for direct connection of pulleys, gears or sprockets which must be bearing supported from the shaft.

Bearing mounted clutches can be readily assembled on shafts without the need of mounting surfaces. The stator should be prevented from rotating by a loose fitting pin. The magnetic field generated by the coil pulls the armature plate across the air gap. Axial movement is achieved by means of a pre-stressed spring which also transmits the torque generated at the friction surface.

(/)(/)

ILI QJ

^Bearing j Ordering example

(6) off clutches type 14.100.03.303

Connectingcab.es ^{24V 6mm bore}