Accessories
Limit
Valves Quick
Exhaust
Valves
Alimit
valve is thebest way to have a mechanical limit toreturn air signals to control
valves or
circuits.Clippard offers limit
valves inports rangingfrom 3-56 up to 1/8” NPT,high force and heavy duty limits as well
as non-contact sensing
valves. The primary function of a quick
exhaust
valve is to increase cylinder
speed. This also enables the use of
smaller directional
valves and longer
control lines. Offered with several port
configurations from #10-32 models up
to 1/4”.
Flow Controls
Clippard offers a large variety of
flow controlsand needle valvesfor adjusting the speed of the
cylinder. Several models are
available from fine adjustments to
coarse adjustments in a variety of
mountingconfigurations.
Clamps Super Structures
Clippard’sstainless steel
clamps are
designed to beused with the Hall Effect and the reed
switch. All clamps should be ordered
based upon the size of the cylinder on
which it will be mounted. The part
numbers show the bore size using the
numerical code. Each clamp is 3/8” wide
stainless steel, and is equipped with a
locking screw with #5-40 threads. Here’s a building block
concept to speed
construction of small
equipment, fixtures, jigs
and tooling. Machined
steel blocks adapt to anyposition on the column and base. Offset
extensions are provided through use of
fixture and block mounting shafts of
various lengths. Use of proper size brass
slotted adapter permits mounting small
bore cylinders or other parts. Column
base is drilled for mounting. The Super
Structures are extremely solid and secure,
yet fully adjustable.
Reed
Switches
The Clippard RS magnetic reed
switches have power ranges to 25
watts, current up to 1.5 amperes
and a rated life span of 10 million
cycles. Plan to use them where the
high performance of the Clippard
HS Hall Effect switch is not
required.Two models are available: 36 voltsor 200 volts AC/DC. Each is a SPST
normally open configuration.
When the cylinder’s magnet-
equipped pistonmoves to alocation where the magnet is
positioned below the reed switch,the switch sends a feedback
signal to indicate piston location.
In the 36 VDC model, an LED
provides switch closing indication.
Hall Effect
Position
Sensors
Clippard Hall
Effect sensors offer the user more
accurate sensing of piston location for
the ultimate in pneumatic system
control.The Hall Effect sensor operates withClippard stainless steel pneumatic
cylinders equipped with internal
magnets on the pistons. By accurately
sensing the magnetic field of the piston
when it passes beneath the sensor, theposition of the rod piston is
determined,and a feedback signal iscreated.
Mounting Hardware
For efficient power and easy mounting,Clippard has designed and manufactured
brackets suitable for each Clippard
cylinder.
513.521.4261 • www.clippard.com/cylinders/
