Actuators Overview - Clippard - #12

/ 12


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
Pages:


See other catalogues for Clippard

Text version of the page

Valve ActuatorsAir Piloted Valves

Single Acting Spring Return Pilot Actuator Air Piloted Normally Closed 2- &3-Way PoppetValves

Air Flow: @ 50 psig - 4.0 SCFM@ 100 psig - 6.8 SCFM Bore Size: 1.250” dia. Input Pressure: 150 psig maximum Air Pilot Pressure: 15 psig min. Inlet Port: #10-32 female thread Order No.: PAV-2Inlet - #10-32Outlet - #10-32PAV-2PInlet - 1/8-27 NPTOutlet - #10-32 Force Factor: 1.2 Order No.: MPA-10MPA-10P(with 1/8” NPTfemale thread) 3-Way PAV-3 Inlet - #10-32Outlet - #10-32PAV-3PInlet - 1/8-27 NPTOutlet - #10-32

Single Acting Spring Return Vacuum Actuator

Input Pressure: 30 in. Hg vacuum Inlet Port: #10-32 female thread Order No.: MVA-10MVA-10P(with 1/8” NPT female thread)

Air Piloted Normally Open 2- &3-Way Poppet Valves

Air Flow: @ 50 psig - 6.8 SCFM@ 100 psig - 11.6 SCFM Air Pilot Pressure: 15 psig min. Order No.: PAVO-2Inlet - #10-32Outlet - #10-32PAVO-2PInlet - 1/8” NPTOutlet - #10-32

Round Solid Brass 5/8” & 13/32” dia. Push Buttons

Use: Mounts directly on valve stem for manual operation of valve; prevents overtravel of valve stem by providing apositive stop 3-Way PAVO-3Inlet - #10-32Outlet - #10-32PAVO-3PInlet - 1/8” NPTOutlet - #10-32 Note: Individually packaged or bulkquantities available Order No.: 11916-1 - 5/8” Diameter with1/8” Stem11916-2 - 5/8” Diameter with3/16” Stem11916-3 - 13/32” Diameter with 1/8” Stem11916-4 - 13/32” Diameter with 3/16” Stem

Roller Cam Actuator

Mounting: 31/64” dia. mounting hole fits15/32-32 threaded mounting section ofvalve bodies Operation: Mounts to valve body, actuatesvalve when mechanically depressed; valvespring provides return Order No.: 11925

Ball Cam ActuatorAdjustable Travel Needle Type Foot Pedal

Permits the valves and electrical switch to beoperated by mechanical movement depressingthe ball from any direction Operation: Will actuate valve while depressedfrom any (360Ëš) direction

Roller, Double-Pivoted One-Way CamFollower Actuator

Order No.: MBA-1 Mounting: 31/64” dia. mounting hole fits15/32-32 threaded mounting section ofalve bodies Operation: Mounts to valve body,actuates valve when depressed byactivating cam orlinear travel device in onedirection only; no actuation on return travel “Hands-free”touch-of-toe operation of endlesstypes of automated and semi-automatedmachinery and equipment, jigs and fixtures, is possible through use of this sturdy treadle type footpedal, combined with Clippard miniature valves,plunger type air pressure controls, and electricalswitch. Order No.: 12296 Order No.: FPA-1

513.521.4261 • www.clippard.com/valves/


pageCatalog pdf di En 2012-05-22-28