Catalogs >
CLEMCO INDUSTRIES >
1 Cuft Classic Blast Machine System (Rev. F)

1 Cuft Classic Blast Machine System (Rev. F)
2Pages

Catalog excerpts

1 Cuft Classic Blast Machine System (Rev. F) - 1

Description Field-portable, light-duty, industrial, single-chamber blast machine rated at 125 psi working pressure. Model 1042 holds 1 cubic foot of media (100 lbs expendable, mineral abrasive). This unit is equipped with MSV abrasive metering valve. 1 Cuft Classic Blast Machine System with 1/2" piping TECHNICAL DATA SHEET Model 1042 with HP respirator and accessories Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment. High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications Model 1042 holds 1 cubic foot of abrasive providing 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle. This unit can operate with as little as 12 cfm of air volume. Requirements for Operation These items are required but not included with this equipment: • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294). • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine. • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized. • NIOSH-approved, type CE, suppliedair respirator. • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com). • Abrasive blast media specifically manufactured for abrasive blasting and appropriate for your application. • Appropriate blast suit, work boots, hearing and eye protection. The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified. Remote control system complies with OSHA regulation 1910.244 (b). • One-man portable industrial-quality blast machines manufactured to ASME code. • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system. • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow. • State-of-the-art NIOSH-approved respirator with DLX comfort-fit suspension.

Open the catalog to page 1

1 Cuft Classic Blast Machine System (Rev. F) - 2

1 cuft Blast Machine with Remotes and LP model Respirator for use with Ambient Air or HP model respirator for use with Compressed Air Apollo Respirator RLX Pneumatic Handle Leather Gloves Respirator Hose Respirator Air Flow Device Optional Cover Twin Line Hose Model 1042: 1 cuft Blast Machine, Classic with 1/2" piping, 125 psi working pressure Item Description Includes MSV 1/2" abrasive metering valve Includes: Blast machine 21053, Apollo 20 LP DLX (for use with ambient air) Respirator with Constant Flow Connector, 50 ft. respirator hose, and Accessory Package Includes: Blast machine 21053,...

Open the catalog to page 2