Internal Pipe Tools (Rev. A)
8Pages

{{requestButtons}}

Catalog excerpts

Internal Pipe Tools (Rev. A) - 1

Precise, Economical, Internal Pipe Cleaning Fast, Efficient, Internal Pipe Coating

Open the catalog to page 1
Internal Pipe Tools (Rev. A) - 2

Clemco tools make pipe cleaning easier Suitable for pipe ID sizes from 3/4-inch to 120 inches Easy to set up All use standard pressure blast machine No need to rotate pipe or tubing Fast, economical, efficient pipe cleaning Cleaning and Preventing Corrosion with Proper Surface Preparation Clemco pipe tools help you get the job done faster, enhancing productivity and saving you money. Clemco tools are engineered for a wide range of pipe diameters and most common blast abrasives. Each tool handles a specified pipe diameter range with the use of centering devices. These pneumatic tools use...

Open the catalog to page 2
Internal Pipe Tools (Rev. A) - 3

Clemco Spin-Blast — for pipes 8-inch to 60-inch ID The Spin-Blast cleans pipe at rates unobtainable by any other means. The Spin-Blast comes in two model sizes: SB-836 for pipes 8-inch ID to 36-inch ID, with the standard nozzle head; and SB-3660 for pipes from 36-inch to 60-inch ID with a nozzle head capable of holding two nozzles. In operation, two standard nozzles installed on the head cause the head to rotate and propel abrasive to the pipe surface for incomparable hitting force. SB-3660 uses long venturi nozzles for effective blasting of larger ID pipe. Adjustable carriages are used to...

Open the catalog to page 3
Internal Pipe Tools (Rev. A) - 4

For Large Diameter Pipe Two models for large diameter pipe serve the needs of rugged, high-production operations. Engineered to be truly heavy-duty for real world conditions, they have few moving parts, which translates to more optimum maintenance-friendliness. Rugged construction, easy control For 16-inch to 60-inch diameter pipe, the Pipe-Pro XL is a pneumatically-operated tool for cleaning pipe interior surfaces. It attaches to the blast hose in place of a TM standard nozzle. The Pipe-Pro XL features an air motor, which controls the rotation of blast head, where two identical nozzles...

Open the catalog to page 4
Internal Pipe Tools (Rev. A) - 5

Internal Pipe Blasting Tools TOOL ORDERING INFORMATION NOZZLE AIR CONSUMPTION & ORDERING INFORMATION Nozzle Orifice Note: Air volume required to operate Spin-Blast models is greater than air normally consumed by the two nozzles; the additional air volume is needed for blast head rotation. Maintaining recommended air volume ensures proper function and maximum productivity. 1/4” long venturi 5/16” long venturi 3/8” long venturi 1/4” short venturi 5/16” short venturi 3/8” short venturi 1/4” long venturi 5/16” long venturi 3/8” long venturi Note: Air volume for Pipe Pro XLTM models is volume...

Open the catalog to page 5
Internal Pipe Tools (Rev. A) - 6

Efficiently handles wide range of coatings Applies uniform layer at remarkable speed No need to rotate the pipe or tubing Unique gun assembly ensures precise control Air-controlled centering carriage legs easily adjust for gradual pipe bends Two models cover pipe IDs from 3.5 inches through 37 inches. Each unit comes in a sturdy, stackable storage box. Simple Solution for Industrial Coating Challenges The Clemco Orbiter provides an innovative and efficient solution to the difficult job of applying paint to the inside of pipe, conduit, tubing or other cylindrical structures. With the...

Open the catalog to page 6
Internal Pipe Tools (Rev. A) - 7

A Simple, Fast, and Cost-Effective Job Precise components ease assembly. Used with any standard airless paint spray pump with a minimum pump pressure ratio of 30:1; the Orbiter set up is quick and easy (the pump size will depend upon paint viscosity, hose length, and tip size). The Orbiter is powered by compressed air, which operates the rotating head and the carriage legs. Orbiter I and Orbiter III require approximately 15 cfm and 22 cfm respectively, both at 90 psi. Various sizes of long-lasting tungsten carbide spray tips are available to suit the specified coating. Paint flows through...

Open the catalog to page 7
Internal Pipe Tools (Rev. A) - 8

Internal Pipe Coating Tools Orbiter I: For pipe ID: 3.5” to 7” (90mm to 150mm) Air consumption: 15 CFM (400 litres/min) Operating speed under load: 20,000 RPM Air motor rated at 25,000 RPM Standard spray tip: .026 For pipe ID: 7” to 37” (180mm to 950 mm) Air consumption: 22 CFM (600 litres/min) Operating speed under load: 10,000 RPM Air motor rated at 15,000 RPM Standard spray tip: .036 SPECIFICATIONS COMMON TO BOTH TOOLS Air pressure: maximum 90 psig (5 to 6 bar) Airless pump* 30:1 ratio (min) 45:1 ratio Pump capacity 1.0 U.S. GPM (min) 2.5 U.S. GPM * The pump pressure ratio will depend...

Open the catalog to page 8

All CLEMCO INDUSTRIES catalogs and technical brochures

  1. Apollo 600

    4 Pages

  2. Apollo 20 HP

    2 Pages

  3. CLASSIC SERIES

    12 Pages

  4. Options Plus

    4 Pages

  5. Pulsar VI-PE

    2 Pages

  6. Pulsar III-P

    2 Pages

  7. Clemco Mule

    1 Pages

  8. COMFORT VEST

    7 Pages

  9. FLAT-TRAK ®

    29 Pages

  10. RPH

    11 Pages

  11. RPC-2

    12 Pages

  12. MB series

    2 Pages

  13. Super Comet

    4 Pages

Archived catalogs